Potassium chloride granules production with pan granulator

In the production of potassium chloride granular fertilizer, the powder can be granulated by disc fertilizer granulator. The particles produced by disc granulator are spherical and have good strength. It can be widely used in agricultural production.

In the granulation process of disc fertilizer granulator, adhesive needs to be added to form the particles. The binder can be compounded by ordinary inorganic minerals in a certain proportion. When potassium chloride is granulated, the adhesive has synergistic effect.

Disc Granulation Line
Disc Granulation Line

When using adhesive granulation, it has a good effect on granulation rate and particle strength. Potassium chloride is granulated by disc fertilizer granulator, and the particles are spherical.

Process flow of NPK fertilizer production line

NPK fertilizer production line deals with potassium chloride fertilizer. First, all raw materials are mixed through the batching system and crushed to the appropriate particle size through the chain mill. The disc fertilizer granulator makes the powder into particles.

After drying and cooling, the potassium chloride particles are coated with a protective film through a fertilizer coating machine to complete the particle processing of potassium chloride.

Disc fertilizer granulator NPK fertilizer production line

When applying potassium chloride, attention should be paid to the appropriate potassium application period.

The application period of general potassium fertilizer should be early or not late, and it should be used as base fertilizer and early recovery period. When the application amount of potassium fertilizer is small, it can be used as base fertilizer at one time.

When the application amount of potassium fertilizer is large or the soil texture is light, the application effect of base fertilizer and topdressing is better.

Soil nutrients and fertilization should also be considered when determining the appropriate application period of potassium fertilizer.

In the soil with serious potassium deficiency, the middle soil potassium fertilizer should be fully applied with potassium fertilizer as the base fertilizer, appropriate organic fertilizer as the base fertilizer, combined with topdressing.

Pay attention to the application method of potassium chloride. The centralized application of potassium fertilizer is conducive to improve its utilization rate and achieve good results. However, direct contact with seeds or seedlings is not recommended. For general crops, the combination of soil fertilization and foliar fertilization can be adopted.

More detailed info, welcome go to https://organicfertilizermachines.com/npk-fertilizer-manufacturing-process/

Organic Compound Fertilizer Production

The composition of organic fertilizer is complex, and rational application is very important. Fertilizer granulator equipment manufacturers suggest that we pay attention to the following two points.

1. Organic fertilizer should be fully decomposed before application. If some animal manure, such as pig manure, cow manure and sheep manure, is directly applied to the soil without fermentation and decomposition, the decomposed organic fertilizer in the soil will be decomposed and fermented by microorganisms, and the ammonia produced is easy to cause crop root burning, and some will breed weeds and spread diseases and pests.

NPK Drum Granulation Line
NPK Drum Granulation Line

We advocate using a dumper to fully ferment manure before application. After the compost is wetted with water, it is put into the fermentation tank to make the temperature reach 35-40 ℃. When feces are fully fermented at high temperature, it can kill insect eggs and weed seeds in compost, which is safer and more effective.

2. Organic fertilizer should not be too thick or applied too much. Especially when fertilizing dry land crops, if organic fertilizer is applied directly between rows or near the roots of crops, the concentration around the roots is too high due to the small water holding capacity of dry soil.

After the root system contacts the fertilizer pile, it will cause physiological water loss of crops and form reverse osmosis. Crops not only do not absorb nutrients, but also make water and nutrients in roots exude, resulting in poor growth or withering of crops, but water loss and dead seedlings cause soil nutrient imbalance.

The fertilizer made by NPK fertilizer manufacturing process can not alleviate soil problems, while organic fertilizer plays a great role in soil fertilization.

Therefore, organic fertilizer should be used as the base fertilizer, evenly mixed in the soil and integrated with the soil. When applying organic fertilizer in the growth period, ditch application or hole application should be adopted. Do not spread the pesticide on the ground. Foliar vegetables generally should not be sprayed with high concentration liquid organic fertilizer as foliar fertilizer.

How to select compound fertilizer for your plants?

After further granulation by drum granulator, the compound fertilizer contains nutrients required by a variety of plants, which is better than a single chemical fertilizer. So how to choose compound fertilizer?

1. Look at the packaging. Qualified products are packed in double layers to prevent moisture. There are three license numbers on the packaging surface: production license number, business license number, product quality registration certificate number, nitrogen, phosphorus and potassium content identification, and manufacturer and address. Open the outer package and there should be instructions in the bag.

Compound Fertilizer Granules produced by NPK Plants
Compound Fertilizer Granules produced by NPK Plants

2. Look at the physical properties of compound fertilizer. Compound fertilizer with good quality, uniform particle size, no caking and no pulverization.

3. Buy compound fertilizer produced by regular manufacturers. The fertilizer production line and production technology of regular manufacturers are relatively advanced, the product quality is reliable and the reputation is guaranteed.

4. Select the compound fertilizer suitable for the local area. The locally produced compound fertilizer is mostly produced according to the soil nutrient content, crop fertilizer demand law and fertilization effect in this area and surrounding areas, which is highly targeted.

5. Avoid using “dichloro” compound fertilizer for many years. “Dichloro” compound fertilizer is a compound fertilizer produced with ammonium chloride and potassium chloride as raw materials. If the “dichloro” compound fertilizer is applied year after year, the amount of chloride ions stored in the soil is large, and excessive absorption by crops will cause “chlorine damage” and soil will also cause “salt damage”.

Whether planting flowers or vegetables, we should follow the fertilization principle of “giving priority to organic fertilizer and supplemented by chemical fertilizer”. The long-term single large-scale use of chemical fertilizer is easy to cause soil hardening, soil fertility decline and soil acidification.

On the contrary, it will limit crop yield and affect product quality. Therefore, after purchasing NPK compound fertilizer granulator, we must pay attention to the treatment of various nutrient compound fertilizers.

Want to save your cost on this? Why not make it buy your own? Details, welcome go to https://organicfertilizermachines.com/compound-fertilizer-production-line/

How to dry wet compound fertilizer granules?

Particle drying is an essential step in the production line of nitrogen, phosphorus and potassium fertilizer. The state requires that the moisture content of compound fertilizer must be less than 30% to meet the national standard. Then in the process of compound fertilizer production, the water content of organic fertilizer after granulation reaches about 50%.

Sometimes even higher, the moisture content of dry particles has become an important link in fertilizer production.

Rotary Drum Dryer Used in Fertilizer Production Line
Rotary Drum Dryer Used in Fertilizer Production Line

In the drying process of fertilizer manufacturing process, it is very important to pay attention to the drying method. The fertilizer produced by the compound fertilizer equipment is full dry fertilizer. So how does compound fertilizer equipment produce dry fertilizer? What are the methods?

1. Mechanical dewatering method: mechanical dewatering method is to pressurize materials and then extrude some water. Common methods include pressing, sedimentation, filtration, centrifugation, etc. Mechanical dehydration is only used for the initial dehydration of raw materials. This method is not suitable for the production of particles.

Therefore, the moisture content of materials after mechanical dehydration is still high, generally 40-60%. However, mechanical dehydration is the most economical method, which is most suitable for the dehydration of poultry and animal feces.

2. Heating and drying method of compound fertilizer dryer: This is what we often call drum dryer drying method. It uses heat energy to enter the dryer barrel, and the temperature in the barrel reaches about 150 degrees. According to different materials, the temperature can be adjusted to evaporate the water in the materials.

A certain amount of heat energy is required to remove the water in the materials. This method usually uses air to dry the material. The air is preheated and sent to the dryer to transfer heat to the material, so that the water in the material evaporates to form water vapor, which is brought out of the dryer with the air.

The material can be heated and dried to remove the combined water in the material, so as to achieve the water content required by the product or raw material. This method can be applied to a variety of industries, and it is also one of the simplest methods to meet the requirements.

3. Chemical dehumidification method: this method uses hygroscopic agent to remove a small amount of moisture in gas, liquid and solid materials. Due to the limited dehumidification capacity of hygroscopic agent, it is now only used to remove trace moisture in materials. Therefore, this method is rarely used in production.

More detailes on dryer, go to https://www.fertilizer-plants.com/rotary-drum-dryer/

How to maintain NPK fertilizer production line?

NPK fertilizer production line equipment needs regular maintenance. If it is not maintained for a long time, it will seriously affect the service life of the equipment and may also bring potential safety hazards. The following small series will introduce the equipment maintenance methods of compound fertilizer production line in detail:

20t per hour drum granulation plant layout
20t per hour drum granulation plant layout

1. After long-term use, regularly check whether all parts of the equipment of the compound fertilizer production line work normally, and timely deal with the problems found;
2. The equipment of compound fertilizer production line needs to lubricate the bearing in use. When choosing the lubricant, we must choose the product with good cleanliness and tightness;
3. If the temperature of the machine is found to be too high during use, stop working immediately and check the cause of the excessive temperature. This is very important. If you continue to work at high temperature, it will cause great damage to the equipment of the compound fertilizer production line

The above shared equipment maintenance methods of compound fertilizer production line hope to be helpful to you.

In recent years, Zhengzhou Shunxin heavy industry has continuously launched new products on the basis of digesting and absorbing the advanced achievements of products at home and abroad.

The product quality has been steadily improved, and the products have been serialized and standardized, which has won the unanimous recognition of customers.
Our best-selling products include compound fertilizer equipment, fertilizer granulator, stacker, dryer, pulverizer, mixer and rotary coating machine.

More detailed info on npk fertilizer production machine, go to https://organicfertilizermachines.com/npk-fertilizer-manufacturing-process/

How to dry compound fertilizer granules?

Drying process is also the key of NPK fertilizer production line. The fertilizer should be dried after granulation to reduce the moisture in the particles and increase the hardness of the particles, which is very important to the quality of the fertilizer.

1. The installed dryer shall be subject to an empty machine test for not less than 4 hours. In case of any abnormality during commissioning, it shall be handled in time.

Rotary Drum Dryer Used in Fertilizer Production Line
Rotary Drum Dryer Used in Fertilizer Production Line

2. After commissioning, retighten all connecting bolts, check and supplement lubricating oil. After the test is normal, the load test can be carried out.

3. Before load test run, single air test run shall be conducted for each auxiliary machine. After the single machine test is successful, transfer to the joint test.

Detailed info on rotary drum dryer from sx, go to https://fertilizerplantequiment.com/rotary-drum-drying-machine/

4. Ignite the hot air oven to preheat the dryer and start the dryer at the same time. Do not rotate the cylinder to prevent the cylinder from bending.

5. According to the preheating condition, the wet material is gradually added into the drying cylinder, and the feeding amount is gradually increased according to the moisture content of the discharged material.

6. The preheating of the dryer needs a process, and the hot blast stove should also have a preheating process. Sudden fire is prohibited. Prevent local overheating and uneven thermal expansion and damage.

7. Fuel combustion value, thermal insulation quality of each part, moisture content of wet material and uniformity of feeding amount affect dry product quality and fuel consumption. Therefore, it is an effective way to improve economic benefits to make each part reach the state as much as possible.

8. In the working state, the roller frame shall be filled with cooling water.

9. All lubricating parts shall be filled in time.

10. During shutdown, the hot blast stove shall be closed first, and the drying cylinder shall continue to rotate until it is cooled to close to the outside temperature.

11. It is forbidden to stop at high temperature to prevent the cylinder from bending and deformation.

12. In case of sudden power failure, close the hot blast stove immediately, stop feeding, and turn the cylinder half a circle every 15 minutes until the cylinder cools down.

The operating procedures of this fertilizer manufacturing process should be careful and professional. Failure to follow this procedure will cause the cylinder to bend.

NPK Organic Compound Fertilizer Application Methods

NPK compound fertilizer has comprehensive nutrition, high content and good physical properties. But how to use NPK compound fertilizer correctly? Three problems should be paid attention to in the application process.

First of all, NPK compound fertilizer should be selected according to different soil and crops. Only in this way can its fertilizer efficiency be exerted. Rice, wheat, corn and other food crops need more nitrogen fertilizer, nitrogen and phosphorus compound fertilizer can be used; Leguminous crops can fix free nitrogen in the air, and can apply phosphorus and potassium fertilizer. Some economic crops can choose ternary or multivariate compound fertilizer suitable for local soil and climate conditions.

Here are solutions to make npk compound fertilizer granules, go to https://www.fertilizer-plants.com/npk-fertilizer-production-line/

The second is the combination of compound fertilizer and simple fertilizer. The nutrient composition of compound fertilizer is fixed. Only when combined with various element fertilizers can the nutrient requirements of crops in different periods be met.

NPK Production Line
NPK Production Line

Generally speaking, compound fertilizer should be used as base fertilizer, and simple fertilizer can be used as top fertilizer at peak and critical period. At the same time, organic fertilizer must be applied.

Third, the method should be appropriate. In various compound fertilizers, the proportion and form of various nutrients are different. In addition, soil and crop types are different, so fertilization methods should not be the same, should be treated differently.

Clay soil fertility should be applied deeply, sandy soil fertility can be removed easily, and a small amount of fertilizer can be applied. The compound fertilizer containing ammonium nitrogen should be covered deeply to reduce the loss. How to make npk fertilizer granules at large scale? Go here for more.

The compound fertilizer containing phosphorus and potassium should be applied in a centralized way and near the root system to avoid nutrient fixation and promote the absorption and utilization of crops. Generally speaking, expensive potassium dihydrogen phosphate should not be used as base fertilizer, but as external fertilizer or seed soaking.

How to make npk fertilizer granules?

The granular organic fertilizer production line uses granulation technology to make granules. Your raw material for granulation should be powder, and then our granulation equipment will uniformly granulate your NPK powder into granules. Here we provide you with disc granulator and NPK compound fertilizer roller press granulation.

20t per hour drum granulation plant layout
20t per hour drum granulation plant layout

Using our granulation equipment, you can get good granulation of NPK fertilizer, granulation process of NPK, you can choose the shape of the particles.

In addition, if you want to produce high quality NPK fertilizer granules in a simple step, our factory will provide you with fertilizer granule mixer. You just need to batch NPK fertilizer according to the formula, and then our bbfertilizer mixer will mix them evenly. Finally, you can get a good mix of NPK fertilizer particles.