Bio-organic fertilizer production projects solutions

1. The use of animal manure to produce bio-organic fertilizer. Livestock and poultry manure is rich in organic fertilizer and also contains a certain amount of nitrogen. Nutrients such as phosphorus and potassium required for plant growth are high-quality raw materials for the production of bio-organic fertilizers.

Bio Fertilizer Production Line
Bio Fertilizer Production Line

In the process of making bio-organic fertilizers, the dry-wet ratio and carbon-nitrogen ratio are adjusted by peat and rice bran. Add peat and rice bran to livestock and poultry manure, adjust the humidity of the material to about 50%, remove non-fermentable debris such as chicken manure, and the width is 2m, which is suitable for production. After fermentation, it is dried and crushed, and then sifted out of the debris. Disc granulators are used for granulation, packaging bio-organic fertilizers.

2. The bio-fertilizer project uses organic waste to produce bio-organic fertilizer. Organic waste refers to the garbage containing material components in urban and rural household garbage, mainly including crop straw, fiber, bamboo, waste paper, kitchen waste, etc. If this organic waste is not treated in time, it will become a source of pollution in the city. Environment, such as odor emissions, disease transmission, water pollution, etc.

Therefore, it is necessary to apply organic fertilizer scientifically and rationally. It makes up for the shortage of nitrogen, phosphorus and potassium fertilizer manufacturing process products. It can not only avoid the adverse consequences caused by self-accumulation and decomposition, but also significantly reduce the pollution caused by the application of a large number of chemical fertilizers to the environment.

After the pretreatment of organic waste, straw is added to adjust the C/N ratio of organic waste, and then the moisture content of the wastewater is adjusted, and the rapid composting compound bacterial agent is inoculated, high temperature fermentation, and medium temperature drying temperature.
In terms of equipment required for biofertilizer production, the decomposed materials need to be granulated with a fertilizer granulator. It can be made into bio-organic fertilizer after further drying, sieving and packaging.

More detailed info, welcome go to https://organicfertilizerplants.com/

Deodorization method in organic fertilizer production process

The organic fertilizer production line is used to produce organic fertilizer, organic waste, sludge, straw, sawdust, food processing waste and other materials, which will produce all kinds of peculiar smell if they are piled up in one place for a long time.

These wastes are treated in the organic fertilizer manufacturing process to become valuable organic fertilizer and contribute to agriculture.

How does the organic fertilizer equipment deodorize these organic wastes?

Here is a brief introduction.

There are many methods to eliminate odor, such as

1. Adsorption method;

2. Air dilution method;

3. Ozone oxidation method;

Bio Fertilizer Plant Design
Bio Fertilizer Plant Design

4. Masking method;

5. Chemical treatment;

6. Water washing method;

7. Combustion mode;

And plasma and biological deodorization.

The above methods are one of the deodorization methods in the process of organic fertilizer production. Each organic fertilizer production line uses different methods, and each method has its own deodorization method and system.

In the process of producing organic fertilizer, it is necessary to use a dumper for fermentation treatment, so that these materials can remove peculiar smell and harmful substances through the deodorization system. Therefore, the deodorization system of organic fertilizer production line is an essential detail.

More detailed info on organic fertilizer production, welcome go to https://organicfertilizermachines.com/organic-fertilizer-production-line/

Detailed Process on Pig Manure Fertilizer Production

Pig manure is a good organic fertilizer, which contains a large amount of nitrogen, phosphorus and potassium required for plant growth. It is suitable for plant growth and can improve the yield of food crops. Using pig manure to produce organic fertilizer is a way to change pig manure.

The pig manure organic fertilizer production line has made a breakthrough in the harmless and resource reuse of pig manure. The complete set of equipment for making organic fertilizer from pig manure makes pig manure become organic fertilizer, which solves the long-standing problem that pig manure is difficult to recycle and seriously pollutes the environment.

Bio Fertilizer Plant Design
Bio Fertilizer Plant Design

Pig manure organic fertilizer production line

The process flow of pig manure organic fertilizer equipment production line is slightly more complex than NPK fertilizer manufacturing process. Raw materials need to be fermented first and then granulated.

1. Raw material fermentation.
2. Automatic batching by computer belt scale.
3. Crushing and mixing.

4. Granulation for pig manure production.
5. Organic fertilizer granules are dried with a dryer.
6. The organic fertilizer particles are cooled by a cooler.

7. Qualified organic fertilizer particles are screened out by screening machine.
8. Coater film particles, smoother.
9. Automatic filling and sealing of organic fertilizer particle packaging scale.

More details on turning pig manure into fertilizer, welcome go to https://manuretofertilizer.com/pig-manure-management/

3 key steps to make organic fertilizer products

The three main processes of organic fertilizer production line include organic fertilizer fermentation, fertilizer granulation and fertilizer drying and cooling.

1. First, the organic fertilizer production line ferments and decomposes livestock manure and other raw materials. The whole process of fermentation can kill the internal harmful bacteria, and killing bacteria is also an important step in the whole process of organic fertilizer production.

Secondly, it is necessary to use semi wet material crusher equipment of organic fertilizer to crush livestock manure and raw materials. Raw material matching is one of the important processes of organic fertilizer production line.

Bio Fertilizer Production Line
Bio Fertilizer Production Line

The main purpose is to add appropriate amount of auxiliary materials according to the formula proportion to improve the quality of fertilizer. Mechanical granulation should be carried out after the raw materials are evenly mixed, which is one aspect of the whole organic fertilizer production line process.

The complete organic fertilizer production line includes three processes

2. It is especially suitable for high viscosity materials. The material of fertilizer granulator should meet the production requirements of pressure, temperature and catalyst resistance, and keep the product clean. Due to the different materials of fertilizer granulator, the production process and structure of fertilizer granulator will be different, so it can be divided into steel, lining equipment, etc.

The complete organic fertilizer production line includes three processes

3. High temperature energy can be obtained after the raw materials are dried, and the next step is to cool them at low temperature. Since water cannot be used for cooling, it is necessary to separate the contact between material and water through cooler. The screening machine will screen unqualified organic fertilizer particles. The screening equipment has the advantages of high efficiency and easy operation. More details, go to https://organicfertilizerplants.com/organic-fertilizer-production-process/

What to do before organic fertilizer production?

Organic fertilizer production line is the production line of organic fertilizer particles and organic fertilizer powder. As we all know, if you want to granulate organic fertilizer, you must first make it into powder, and then granulation, so the powder production line is an important part of the particle production line.

Now, I will introduce the process of the organic fertilizer production line in detail together with the granular organic fertilizer production line. According to the process layout, the process flow of granular organic fertilizer production line is: Fermentation – crushing – mixing – granulation – drying – Screening – Coating – packaging. The technological process of powdered organic fertilizer includes the above four processes (fermentation, crushing, screening and packaging).

Organic Fertilizer Production Process
Organic Fertilizer Production Process

The preparations for the construction of the organic fertilizer processing plant are as follows:

1) The construction of organic fertilizer production line should meet the requirements of environmental protection policy. Environmental protection is not only the desire of the people, but also the policy requirement of the development of agriculture and animal husbandry for environmental protection.

2) The source of raw materials and its surrounding radius determine the location of the factory, site investment, transportation investment, etc.

3) The type of raw materials determines the detailed equipment used in each process stage and affects the investment price of the equipment.

4) The production scale of an organic fertilizer production line is from 3000 tons to 250000 tons per year, which determines the capacity demand of the equipment and affects the price.

5) The recovery of resources mainly depends on the recovery of agricultural non-point source wastes, such as fuel and electricity raw materials and biogas residue as organic fertilizer raw materials.

6) The organic fertilizer production line can be used as feed for other purposes.

7) Construction site: the production site scale and investment scale must be determined according to the planned production scale.

Quality Organic Fertilizer Production Solutions

The fertilizer machine manufacturer of the organic fertilizer production line will tell you the reason for the caking of organic fertilizer. The sx manufacturer of the organic fertilizer production line said in the last article that in fact, the premise of prevention is to find out the cause of caking. Everyont also knows that caking is not conducive to the use of organic fertilizer, and has a certain impact on the production and use of organic fertilizer. Want to answer why pig manure organic fertilizer production line caking.

Small Scale Fertilizer Production Line
Small Scale Fertilizer Production Line

We usually use the materials for fertilizer production, such as ammonium salt, phosphate, trace element salt, potassium salt, etc., most of which contain crystal water and are easy to absorb water and caking, such as ammonium sulfate, which is easy to caking in use. When urea meets with trace element salt, it is easy to agglomerate when releasing water, mainly because urea replaces trace element salt. The crystal water becomes mushy and agglomerates.

Compost Made from Organic Waste
Compost Made from Organic Waste

In the process of chemical fertilizer production, chemical fertilizer production is generally non closed. In the production process, the higher the air humidity is, the easier the fertilizer is to absorb water and caking. If the weather is dry or the raw materials are dry, the fertilizer will not agglomerate easily.
Organic fertilizer production line

The higher the room temperature of extruder granulator, the easier to dissolve. Generally speaking, raw materials will dissolve in their own crystal water, leading to caking. The higher the temperature of nitrogen, the water will evaporate and not caking easily. The temperature is usually higher than 50 ℃. We usually need heating to reach this temperature.

Cattle and Cattle Waste
Cattle and Cattle Waste

The greater the pressure applied on the fertilizer, the easier the contact between the crystals and the easier the agglomeration; the smaller the pressure applied, the less the agglomeration.

The longer the fertilizer is placed, the easier it is to agglomerate. The shorter the time, the less likely it is to agglomerate.

Only when the production line of organic fertilizer does not ignore the problem of caking, can we find out the reason of caking. Serious caking may even affect the use efficiency of organic fertilizer.

Detailed info on organic fertilizer production

Different fertilizer manufacturing processes can be used to produce different types of fertilizer granulators. For example, an organic fertilizer manufacturing process designed to produce an organic fertilizer granulator. However, which fertilizer machines are included in the series?

Fertilizer Production Line
Fertilizer Production Line

In the manufacturing process of organic fertilizer, it mainly includes fertilizer mixer, fertilizer crusher and fertilizer granulator. The fertilizer production of organic fertilizer can be divided into fermentation, mixing and granulation. Parts use different fertilizer machine types.

In the production of organic fertilizer granulator, the first thing is to use the fermentation composter to ferment the raw materials, and then use the horizontal mixer to mix the raw materials. To mix the raw materials, the raw materials need to be crushed first. The utility model uses a new type of organic fertilizer granulator, which is a fertilizer granulator used for producing organic fertilizer granulator and is made into an organic fertilizer granulator.

In the production of organic fertilizer granulator, attention should be paid to the use of raw materials. Due to the requirement of moisture and temperature for organic fertilizer granulator, we need to use drum dryer and cooler to dry the water of fertilizer granulator after granulation.

Organic Fertilizer Production Cost and Invesement Guides

Investment and construction of organic fertilizer production technology
The main raw materials of organic fertilizer production process are pig manure, cow manure, chicken manure, etc.; the ingredients include: rice straw, straw, charcoal, rice straw, rice husk, etc.

The production process of organic fertilizer mainly includes: inoculation and fermentation of organic materials (before fermentation), main fermentation, crushing, compounding and mixing, drying, granulation, cooling, screening, metering and packaging.

Before the organic fertilizer production process is put into operation, the scale and location of the project should be determined. Organic fertilizer production line can be planned according to different raw materials, storage capacity, available amount and market demand. The related technology is divided into organic fertilizer, powder fertilizer and granular fertilizer.

In a word, the equipment configuration of powdery organic fertilizer is simple and the investment cost is low. The complete set of equipment from raw material fermentation to finished product packaging and storage is about 20000 US dollars.

Granular organic fertilizer has high equipment configuration and high investment cost. The investment of small granular fertilizer production line from raw material fermentation to granulation, drying and packaging is about 40000 US dollars.

The higher the production capacity, the higher the investment of organic fertilizer production plant, the lower the production capacity and the smaller the investment. If conditions permit, we can directly produce high-efficiency organic-inorganic compound fertilizer on the basis of organic fertilizer. Market benefit is multiple of organic fertilizer.

How to produce npk fertilizer with double roller granulator

Double roller granulator is an important fertilizer granulator in NPK compound fertilizer industry. Using the extrusion principle, the fertilizer granules with a diameter of 3.5-10 mm are formed, and the granulation rate is higher than 85%. Double roller granulator is a common granulation method in NPK fertilizer production process. It does not dry at room temperature (moisture content is 2% – 5%).

Low cost and fast granulation speed bring good economic benefits for compound fertilizer investment.

Working principle of double roller granulator

Double roller fertilizer granulator machine is the representative of fertilizer granulator with extrusion mode. The dry material is compressed into a hard material. Dense blocks under pressure are extrusion processes. The blocks are then crushed, screened and pelletized, which is the granulation process. The function of extrusion is to squeeze the air between particles, so that the distance between particles is close enough to produce interaction. The hardness of particles produced by rolling is mainly attracted by intermolecular forces. Our double roller granulator is continuous extrusion of materials.

In NPK fertilizer production process, roller granulator has the following advantages compared with other fertilizer granulators:

Double roller granulator for NPK fertilizer production

1. There is no drying system in the fertilizer processing process of roller press granulator. The fertilizer can be granulated at room temperature with a moisture content of 2% – 5%. It forms once and costs less.
2. Rouble roller granulator has small power, reliable motor, no waste discharge, stable granulation and convenient maintenance.
3. Roller granulator has wide adaptability to raw materials. It can be used for granulation of compound fertilizer (including organic fertilizer, NPK fertilizer, biological fertilizer and magnetic fertilizer), mineral powder, chemical industry, feed and other raw materials.
4. This granulator has advanced structure, advanced technology and good economic benefits;
5. Popularize the series production of domestic fertilizer such as rare earth fertilizer, ammonium bicarbonate fertilizer and polysulfate fertilizer.