According to the survey, the utilization rate of chemical fertilizers in my country is only 35%to 40%, and the rest are filtered by soil fixation or rainwater, causing environmental problems such as water pollution and richer lakes. Experts urgently call for reducing the use of chemical fertilizers, using more new biological fertilizers, and applying more organic fertilizers. The vast number of farmers also urgently need a new type of fertilizer to meet the needs of agricultural production.
Organic fertilizerNPK fertilizer production line mainly crushes the previously fermented organic fertilizer raw materials, then sieved, and then measures the raw materials and other compatible components of the adhesive. After further drying to produce powder organic fertilizers), the materials that are fully mixed are evenly delivered to the granulator to make granules through the belt conveyor.
Select the appropriate organic fertilizer granulator according to the requirements of specific process. There are many types of granulators, such as roller extruders, discullars, and drummers. For granularized granular machines with strict particle size control, it is recommended to use roller squeeze granulator; for granular makers with general requirements for particle size and output, organic fertilizer is recommended to turn drummers.
Basically, all granular drying process can be made with double -roller particles. In particular, the particle size of the raw material powder is less than 2mm, preferably less than 1mm, which is very suitable for squeezing granules. Suitable for minced stone, powder, crystal, granular and granular raw materials. For potassium chloride, the standard quality and by -products or products with lower costs are too thin and unable to mix, which is suitable for squeezing. Although granular urea can be used, it is more suitable for powder or crystalline urea with small granularity.
In some cases, the particle size of the raw materials is very large, and the larger particles should be broken first, so that the nutrient distribution in the product is more uniform.
The sharp rise in European natural gas prices has driven the urea market, which has led to a sharp rebound in urea prices. Due to rising production costs, nitrate in Europe also showed an upward trend, while ammonium sulfate continued to weaken.
The sudden European purchase surprised the urea market, reversing the 8% decline last week. The urea market is currently paying close attention to the upcoming urea bidding in India and the procurement in Brazil.
The Indian bidding is scheduled for mid July (it is said that this bidding will exceed 1million tons), and it is expected to be delivered by the end of August. The procurement in summer rainy season in Brazil is about a month later than that in previous years. It is expected that the procurement of urea will pick up, which will form a certain support for the price of urea.
With the arrival of the third quarter, the procurement speed in the southern hemisphere will accelerate, and the urea price may have reached the low point of this year. Buyers are concerned about the speed and level of urea price recovery.
Due to insufficient demand, ammonium sulfate continued to fall by 13%. Ammonium sulfate is now a cheaper nitrogen fertilizer than urea. Due to the rebound of urea, the value of sulfur in ammonium sulfate was ignored. As the price of urea rebounds again, the price of ammonium sulfate may begin to rise.
The gap between the two price categories in the secondary ammonium nitrate Market is widening – the price of ammonium nitrate in Russia is weakening again, while the price of ammonium nitrate from other sources such as urea is also rising.
As most buyers / consumers have sufficient inventory at present, the ammonia price has not changed. Although the price has not changed, the soaring natural gas price in the EU has led people to speculate that ammonia prices may start to rise.
In South Africa, the urea inventory in Durban port is reasonable, and the product supply is about 12000 RAND / ton. The slight strength of Rand will help alleviate the pain of rising urea prices. As the market continues to fluctuate, the seller will adjust the price every week, so it is recommended that the buyer be decisive and quickly lock the price after deciding to buy.
Although the prices of most benchmark plots remain unchanged, the phosphate Market is still facing price pressure. China’s phosphate exports continued to accelerate, while demand in most regions continued to be weak because buyers believed the price was too high.
The demand for spring phosphate fertilizer application in North America and Europe has disappeared, and manufacturers are now waiting for the southern hemisphere to start buying.
Buyers in the southern hemisphere are unwilling to overbought at the current price, so the buyer and the seller are currently stuck. Brazil’s price fell by $10-15 / ton, which is not a big drop and will not excite buyers. But it did signal that phosphate prices were under pressure. Unlike urea, Brazil’s phosphate ponds account for a high share of all Russian exports to Latin America.
The Asian market did not buy too many spot phosphates. Most of the current activities are related to the delivery of phosphate, nitrogen, phosphorus and potassium, which are purchased by Asian countries through bidding. India’s subsidy program cannot enable private sector traders to benefit from phosphate imports. As a result, procurement in India is conducted only by state entities and in limited quantities.
Foskor, a phosphate producer in South Africa, has been operating well in recent months and continues to produce. The lack of phosphate inventory in the region means that all its products will be quickly transferred to buyers before the upcoming season.
At present, phosphate import goods at Beira port and Durban port have been booked, and the port inventory level is expected to gradually increase. Of course, large-scale berthing delay is still a worrying problem, and it is likely to become a key factor, that is, the rainy season from September to October is coming. At present, it is estimated that the delay of about 30 days will not only increase the import cost (the demurrage fee is about $40 / ton), but also increase the risk that growers will not get fertilizer in time.
Most potash benchmark positions were flat. Potassium prices in some Asian markets began to fall, and the overall outlook for potassium prices was weak.
With Brazil getting a lot of potash from Russia, it is difficult for potash prices to fall anywhere. Everyone’s question is “when” and “how much”. As the third quarter approaches, the demand in the southern hemisphere begins to slow down, and the sales of potash fertilizer will begin to pick up, which will slow down the rate of any price decline.
If the price does not decline in the next oneortwo months, rising demand should ensure that the price of potash fertilizer remains stable. The supply of potash fertilizer is still limited, and the balance between supply and demand will not soon turn to oversupply.
Crude oil prices fell by nearly $10 / barrel as concerns about the economic recession intensified. Rising interest rates in the United States led to declines in stock markets and commodities.
Brent crude oil fell from US $120 / barrel to US $111 / barrel, which fell due to the market’s increasing concern about the economic recession. The Fed’s interest rate hike curbed inflation, cooled the commodity market, and crude oil prices responded accordingly.
In terms of natural gas prices, TTF natural gas prices in Europe have risen to more than $40 /mmbtu, and are now slightly lower than $40. European gas prices are unlikely to ease in any way until the European gas supply situation is resolved in some way. The price of natural gas in the United States has fallen to $6.25 /mmbtu, which has relieved American natural gas consumers, including nitrogen producers.
As the extensive long-term selling continued, the corn price of Zhishang exchange in the United States continued to fall. The price of safex corn also fell with the rise of the dollar price, and the strength of Rand exacerbated the decline of local prices. For similar reasons, oilseeds also fell across the board.
The net income of fertilizer sellers and exporters increased due to the reduction of freight by a few dollars.
Fertilizer packaging machine can be divided into automatic packaging machine and semi-automatic packaging machine from the degree of automation. The former does not require human involvement in the entire packaging process, while the latter requires some auxiliary cooperation. Of course, the price of the two fertilizer manufacturing equipment is different, and customers can choose according to their own needs.
Semi-automatic packaging machine only needs to hang the bag manually. The weighing method of the equipment can be selected according to the actual needs of the upper weighing and lower weighing. The material falls due to gravity. When the weight is close to the target weight, the unique two-stage control valve ensures accurate weighing of the material.
This way not only requires a lot of human resources, but also highly polluting materials are easy to cause harm to the human body, especially the work efficiency is much lower than that of fertilizer packaging machines.
With the continuous development and improvement of packaging machines, a variety of products such as single bucket packaging scales and double bucket packaging scales have been derived for users to choose. When purchasing, users can freely choose according to their own materials and packaging needs.
Citrus Root rot is transmitted through soil, so we must pay attention to improving the soil in the process of prevention and control. How to improve soil vitality? To select appropriate fertilizer, the high-quality organic compound fertilizer processed by drum granulator is conducive to improving the soil.
The root system of fruit trees is an important organ for absorbing water and fertilizer. If the root is destroyed, it will become an important organ for invading pathogen conditions. However, in some high water levels, if the water is not drained in time, the soil permeability is poor, affecting the growth of roots. Therefore, the orchard must be well drained, otherwise it will affect the growth of roots.
In addition, we pay attention to fertilizer. We often see that too little or too much fertilizer will affect root growth. In addition, we should pay attention to reducing the damage to the root system in the planting process of citrus fruit trees, which is not conducive to the growth of fruit trees.
Once the citrus leaves and fruits fall off seriously, dig the soil, check the degree of root rot and smell whether there is a fishy smell. The roots of newly infected fruit trees should be carefully collected and burned, and reasonable drugs should be selected for treatment. Otherwise, it will cause further damage to the root system. Once rotten roots of fruit trees are found, they should be treated in time.
Plants need fertilizer for growth. The most common environmental fertilizer is organic fertilizer. Organic fertilizer is a fertilizer containing organic matter, which plays a very important role in the growth of crops.
The raw materials used in the production and processing of organic fertilizer include animal manure, sugar residue, cow manure, sheep manure, horse manure, crop straw and straw, traditional Chinese medicine residue, fly ash, bark sawdust, peanut shell and wheat bran. As long as these wastes are reasonably utilized, the value of organic fertilizer manufacturing process can be brought into play.
The fermentation materials can be continuously put into the fermentation tank and moved 3 meters to the other end of the fermentation tank with a tipper every day. At the same time, the water volume can be adjusted and stirred evenly. This can save a lot of land and labor.
Organic fertilizer crusher. The large impurities and stones in the screened organic fertilizer are separated and crushed, which is beautiful and can ensure the product quality.
Premixer. The screening and crushing of organic fertilizer can ensure the stability of product quality. At the same time, when adding fertilizer and trace elements, it can also play a mixed role in the production of special fertilizer and various compound fertilizers.
Environmental protection and practical organic fertilizer processing equipment.
There are two ways to increase organic fertilizer:
(1) Commercial organic fertilizer. Commercial organic fertilizer is processed through different fertilizer production lines to obtain organic fertilizer, biological organic fertilizer and microbial fertilizer.
Microbial fertilizer contains a large number of beneficial bacteria, which can fix nitrogen, Dissolve Phosphorus and potassium when applied to the soil.
(2) Farmhouse composting. Including lanolin, rabbit oil, butter, lard, chicken oil, etc. (Note: poultry manure must be completely fermented and decomposed).
This machine is used for grain fields, fruits, vegetables and flowers. It is applicable to the technical transformation of organic fertilizer production line in new plant or original compound fertilizer plant.
Main performance characteristics of organic fertilizer flat mold granulator
The press roll of this machine adopts inclined wheel. The speed of both ends of the template is the same as that of the inner and outer ring of the template, there is no dislocation friction between the wheel and the mold, the resistance is reduced, the kinetic energy loss is reduced, and the service life of the mold is prolonged.
This is the main difference from similar die equipment. At the same time, the technology adopted by organic fertilizer granulator is the most advanced technology today. The press rollers of the flat molding granulator are evenly arranged and run smoothly, eliminating the easy feeding of the ordinary flat molding roller.
The organic fertilizer flat mold granulator adopts the central pressure regulating structure to adapt to different materials and ensure the pressing effect. The pressing die of sawdust and corn straw needs a lot of pressure. Among the similar granulation equipment, the drum part is the core part of the whole equipment.
The use of high-quality alloy steel improves the service life of the drum of organic fertilizer granulator.
The bio organic fertilizer flat molding granulator is equipped with a suitable pelletizer on the basis of the fertilizer granulator, so that the cylindrical particles can form balls at one time without returning particles, with high granulation rate, good strength, beautiful and applicable. It is an ideal equipment for biological fertilizer granulation.
In the granulation process of disc fertilizer granulator, adhesive needs to be added to form the particles. The binder can be compounded by ordinary inorganic minerals in a certain proportion. When potassium chloride is granulated, the adhesive has synergistic effect.
When using adhesive granulation, it has a good effect on granulation rate and particle strength. Potassium chloride is granulated by disc fertilizer granulator, and the particles are spherical.
Process flow of NPK fertilizer production line
NPK fertilizer production line deals with potassium chloride fertilizer. First, all raw materials are mixed through the batching system and crushed to the appropriate particle size through the chain mill. The disc fertilizer granulator makes the powder into particles.
Disc fertilizer granulator NPK fertilizer production line
When applying potassium chloride, attention should be paid to the appropriate potassium application period.
The application period of general potassium fertilizer should be early or not late, and it should be used as base fertilizer and early recovery period. When the application amount of potassium fertilizer is small, it can be used as base fertilizer at one time.
When the application amount of potassium fertilizer is large or the soil texture is light, the application effect of base fertilizer and topdressing is better.
Soil nutrients and fertilization should also be considered when determining the appropriate application period of potassium fertilizer.
In the soil with serious potassium deficiency, the middle soil potassium fertilizer should be fully applied with potassium fertilizer as the base fertilizer, appropriate organic fertilizer as the base fertilizer, combined with topdressing.
Pay attention to the application method of potassium chloride. The centralized application of potassium fertilizer is conducive to improve its utilization rate and achieve good results. However, direct contact with seeds or seedlings is not recommended. For general crops, the combination of soil fertilization and foliar fertilization can be adopted.
According to the situation of organic fertilizer production line or compound fertilizer production line, the disc speed should be controlled within a reasonable range to avoid the impact of disc speed on product particle size.
First startup and operation of disc fertilizer granulator
1. Before starting the disc granulator, increase the temperature for about 40 to 50 minutes. Raise the temperature to the extent that the motor V-belt can be pulled by hand; Continuously pull the motor V-belt eight to ten times in the normal working direction.
Then continue heating for about 10 minutes, and then start the machine, but continue heating, because normal production needs to continue heating; Adjust different temperatures according to different characteristics of plastics.
2. During the normal operation of the granulator, the temperature of the granulator shall be kept stable, neither high nor low. Keep the temperature near the pores until the head temperature is about 200 ℃.
3. Feed evenly and add enough. The feed speed shall be properly matched with the feed speed of the machine. Otherwise, the mass and output of particles will be affected.
4. During shutdown, the main engine shall be completely cut off. The head plug (with wrench) must be removed. Preheat separately before next use.
In addition, special attention shall be paid to the inspection of the transmission part of the disc granulator, i.e. the transmission gear.
The rotation of the transmission gear is completed with the help of lubricating oil. Therefore, in the process of gear operation, regularly check its lubrication and add lubricating oil and grease to the gear appropriately to ensure good lubrication of the gear and make the operation of the granulator more stable and reliable.
In addition, our company also produces other fertilizer granulators, double roll extrusion granulators, drum granulators, conveyors, dryers, particle screening machines, packaging machines and other products. For more fertilizer equipment information, please contact us.
1. Determine the type of fertilizer produced. Organic fertilizer is divided into pure organic fertilizer, organic-inorganic compound fertilizer, biological organic fertilizer and microbial compound fertilizer. Different varieties of biological fertilizer, fertilizer production technology and equipment are also different.
2. Selection of fermentation compost Dumper: General fermentation forms include batch fermentation, shallow tank fermentation, deep tank fermentation and tower fermentation. The fermentation equipment is stacked and fermented in different strips due to different compost & fermentation methods.
We have a compost dumper, which is suitable for walking on the ground. For shallow ditch fermentation, we provide simple stacker. Twin screw lathe can be used for deep tank fermentation.
3. Determine the production capacity of biological fertilizer production equipment: for example, how many tons of biological fertilizer production equipment can be produced per hour. Determine the production process and finally determine the price through the production capacity of the equipment.
Biological fertilizer production equipment
4. Determine the equipment allocation level of biological fertilizer production: different equipment allocation levels, different equipment prices and different labor costs. High equipment configuration, high automation of biological fertilizer production process, strong production capacity, less manpower and low production cost per unit fertilizer.
5. Determine the shape of biological fertilizer particles: determine the shape of the final product before purchasing the equipment, which is powder, cylindrical, oblate or standard spherical.
The common granulation equipment are: organic fertilizer granulator, disc granulator, drum granulator, double roll extrusion granulator, flat mold granulator and ring mold granulator. The type of granulator shall be selected according to the local fertilizer market. The price varies with the equipment.
6. Determine the main types of organic raw materials: common organic raw materials include chicken manure, pig manure, cow manure, sheep manure, straw, drug residue, furfural residue, humic acid, pond mud, domestic sludge of municipal sewage treatment plant, etc Different materials make different equipment choices.
In the process of producing organic fertilizer, it is necessary to use a dumper for fermentation treatment, so that these materials can remove peculiar smell and harmful substances through the deodorization system. Therefore, the deodorization system of organic fertilizer production line is an essential detail.
The violent mixing movement of the horizontal mixer shortens the mixing time, faster mixing speed and higher efficiency. Even if there are differences in specific gravity and particle size of materials, good mixing effect can be achieved under the rapid and violent shaking of staggered mixing blades.
In the manufacture of NPK fertilizer, the raw materials need to be fully mixed. The mixer has high mixing uniformity and less residue. The horizontal mixer is suitable for mixing more than two kinds of fertilizers, additives and premix.
According to different soil and crop formulas, the formula of organic-inorganic compound fertilizer is the same as that of inorganic fertilizer. If the fermentation is sufficient and the formula is appropriate, the effect is better than inorganic fertilizer and the cost is lower. It can also improve the living environment of plants. It is a green fertilizer.
Production technology of organic-inorganic compound fertilizer
Organic-inorganic compound fertilizer refers to the solid fertilizer made by mechanical processing of organic fertilizer with harmless organic matter (including high-temperature compost) and inorganic fertilizer (mainly nitrogen, phosphorus and potassium fertilizer) as the main raw materials.
Fertilizer production process. This compound fertilizer is configured according to the nutrient characteristics of soil and crops and the purpose of fertilization, and has the characteristics of nutrient balance.
Now more and more investors enter the organic fertilizer industry, but many users only have a simple understanding of the organic fertilizer industry and have no actual production. Therefore, there are still many problems in the investment process.
In fact, these equipment have different types and specifications, such as fertilizer granulator, disc granulator, flat mold granulator and new organic fertilizer granulator, as well as other fertilizer equipment. Of course, the price of machines with different specifications is also different, so everything is subject to the actual production demand of customers.
Organic fertilizer equipment with an annual output of 2000-10000 tons
To sum up, how many complete sets of organic fertilizer equipment with an annual output of 2000 tons to 10000 tons? It depends on the manufacturing process of organic fertilizer.
Whether it’s NPK fertilizer manufacturing or livestock manure production projects of organic fertilizer, you are welcome to consult online or come to the factory to test the machine at any time. We welcome you at any time.
Pig manure is a good organic fertilizer, which contains a large amount of nitrogen, phosphorus and potassium required for plant growth. It is suitable for plant growth and can improve the yield of food crops. Using pig manure to produce organic fertilizer is a way to change pig manure.
The pig manure organic fertilizer production line has made a breakthrough in the harmless and resource reuse of pig manure. The complete set of equipment for making organic fertilizer from pig manure makes pig manure become organic fertilizer, which solves the long-standing problem that pig manure is difficult to recycle and seriously pollutes the environment.
Pig manure organic fertilizer production line
The process flow of pig manure organic fertilizer equipment production line is slightly more complex than NPK fertilizer manufacturing process. Raw materials need to be fermented first and then granulated.
1. Raw material fermentation.
2. Automatic batching by computer belt scale.
3. Crushing and mixing.
1. Organic fertilizer should be fully decomposed before application. If some animal manure, such as pig manure, cow manure and sheep manure, is directly applied to the soil without fermentation and decomposition, the decomposed organic fertilizer in the soil will be decomposed and fermented by microorganisms, and the ammonia produced is easy to cause crop root burning, and some will breed weeds and spread diseases and pests.
We advocate using a dumper to fully ferment manure before application. After the compost is wetted with water, it is put into the fermentation tank to make the temperature reach 35-40 ℃. When feces are fully fermented at high temperature, it can kill insect eggs and weed seeds in compost, which is safer and more effective.
2. Organic fertilizer should not be too thick or applied too much. Especially when fertilizing dry land crops, if organic fertilizer is applied directly between rows or near the roots of crops, the concentration around the roots is too high due to the small water holding capacity of dry soil.
After the root system contacts the fertilizer pile, it will cause physiological water loss of crops and form reverse osmosis. Crops not only do not absorb nutrients, but also make water and nutrients in roots exude, resulting in poor growth or withering of crops, but water loss and dead seedlings cause soil nutrient imbalance.
Therefore, organic fertilizer should be used as the base fertilizer, evenly mixed in the soil and integrated with the soil. When applying organic fertilizer in the growth period, ditch application or hole application should be adopted. Do not spread the pesticide on the ground. Foliar vegetables generally should not be sprayed with high concentration liquid organic fertilizer as foliar fertilizer.
After further granulation by drum granulator, the compound fertilizer contains nutrients required by a variety of plants, which is better than a single chemical fertilizer. So how to choose compound fertilizer?
1. Look at the packaging. Qualified products are packed in double layers to prevent moisture. There are three license numbers on the packaging surface: production license number, business license number, product quality registration certificate number, nitrogen, phosphorus and potassium content identification, and manufacturer and address. Open the outer package and there should be instructions in the bag.
2. Look at the physical properties of compound fertilizer. Compound fertilizer with good quality, uniform particle size, no caking and no pulverization.
3. Buy compound fertilizer produced by regular manufacturers. The fertilizer production line and production technology of regular manufacturers are relatively advanced, the product quality is reliable and the reputation is guaranteed.
4. Select the compound fertilizer suitable for the local area. The locally produced compound fertilizer is mostly produced according to the soil nutrient content, crop fertilizer demand law and fertilization effect in this area and surrounding areas, which is highly targeted.
5. Avoid using “dichloro” compound fertilizer for many years. “Dichloro” compound fertilizer is a compound fertilizer produced with ammonium chloride and potassium chloride as raw materials. If the “dichloro” compound fertilizer is applied year after year, the amount of chloride ions stored in the soil is large, and excessive absorption by crops will cause “chlorine damage” and soil will also cause “salt damage”.
Whether planting flowers or vegetables, we should follow the fertilization principle of “giving priority to organic fertilizer and supplemented by chemical fertilizer”. The long-term single large-scale use of chemical fertilizer is easy to cause soil hardening, soil fertility decline and soil acidification.
On the contrary, it will limit crop yield and affect product quality. Therefore, after purchasing NPK compound fertilizer granulator, we must pay attention to the treatment of various nutrient compound fertilizers.
With the improvement of living standards, people’s demand for machinery and equipment is increasing, and their dependence on machinery is also gradually increasing, which brings pressure to the development of organic fertilizer production equipment.
In the process of fertilizer production, in order to ensure the safety and operation of the production line, operators need to strictly require themselves to operate the equipment correctly. So how should we operate correctly in the operation of organic fertilizer production line? SX company, a large fertilizer equipment manufacturer, provides you with suggestions.
Requirements for safe operation of organic fertilizer production line
2. As workers operating organic fertilizer equipment, they should first standardize their working attitude. Because correct operation is closely related to everyone’s safety, we must not be careless in the operation process, otherwise the materials may be damaged and personal safety may be endangered.
3. Organic fertilizer equipment shall be placed in a reasonable position, and attention shall be paid to ventilation and ground wire. When it is found that it cannot be operated, the workshop production shall be stopped immediately, and the problems shall be found out and handled.
4. Clean the machine in time after using the equipment, especially NPK fertilizer granulator. Regular maintenance of equipment appearance and smooth parts can ensure production and quality, and then bring economic benefits to the company.
5. The complete set of organic fertilizer production equipment shall be installed on the horizontal concrete foundation, especially the large equipment such as drum granulator, drum dryer and cooler shall be fixed with anchor bolts.
Pay attention to the verticality between the main body and the horizontal plane during installation. Configure the power cord and control switch according to the power of the equipment. No load commissioning shall be carried out after passing the inspection, and production can be carried out only after the commissioning is normal. More detailed process, go to https://organicfertilizerplants.com/organic-fertilizer-production-process/
The manufacturing process of organic fertilizer is mainly to screen and magnetic separate the organic waste with a water content of about 30% ~ 35% after fermentation and decay to make a round grain organic fertilizer, add functional bacteria to produce biological organic fertilizer, and add nitrogen, phosphorus and potassium (the total nutrient content is less than 15%) to produce organic and inorganic fertilizers.
After the fermented organic waste is screened by magnetic separation, the raw materials containing binder and other compatible components are measured according to the proportion requirements, and then lifted by bucket elevator to multi-dimensional high-efficiency mixer for rapid mixing.
The mixed material slides out of the mixing bin and is continuously and evenly sent to the extrusion granulator by the disc feeder to make cylindrical particles; The cylindrical particles are polished into spherical particles by the circular particle polishing and setting machine and formed by the belt.
The machine is sent to the drying, cooling and screening machine (three in one model). The particles are dried at low temperature and large air volume (≤ 65 ℃) in the front section of the drying cooling screening machine, and then enter the cooling section for air cooling. After sufficient cooling, the materials enter the screen installed at the end of the cylinder.
The screened finished product particles are transported to the finished product silo by the elevator and measured and packaged by the packaging system; The screened large particles are crushed and returned to the mixed granulation system; The screened small particles (basically without powder) can be made into small packages and sold directly. Get more details on the granulation process, go to https://www.fertilizer-plants.com/granulator-machine-for-fertilizer/
NPK fertilizer production line equipment needs regular maintenance. If it is not maintained for a long time, it will seriously affect the service life of the equipment and may also bring potential safety hazards. The following small series will introduce the equipment maintenance methods of compound fertilizer production line in detail:
1. After long-term use, regularly check whether all parts of the equipment of the compound fertilizer production line work normally, and timely deal with the problems found;
2. The equipment of compound fertilizer production line needs to lubricate the bearing in use. When choosing the lubricant, we must choose the product with good cleanliness and tightness;
3. If the temperature of the machine is found to be too high during use, stop working immediately and check the cause of the excessive temperature. This is very important. If you continue to work at high temperature, it will cause great damage to the equipment of the compound fertilizer production line
In recent years, Zhengzhou Shunxin heavy industry has continuously launched new products on the basis of digesting and absorbing the advanced achievements of products at home and abroad.
The product quality has been steadily improved, and the products have been serialized and standardized, which has won the unanimous recognition of customers.
Our best-selling products include compound fertilizer equipment, fertilizer granulator, stacker, dryer, pulverizer, mixer and rotary coating machine.
Typical application materials: chicken manure, pig manure, cow manure, charcoal, clay, kaolin, etc. This machine is most suitable for direct granulation of organic fertilizer after fermentation, eliminating the drying process and greatly reducing the manufacturing cost.
The new organic fertilizer granulator uses the mechanical stirring force of high-speed rotation and the generated aerodynamic force to continuously mix, granulate, spheroidize and densify the fine powder materials in the machine, so as to achieve the purpose of granulation. The particle shape is spherical, the sphericity is ≥ 0.7, the particle size is generally between 0.3-3mm, and the granulation rate is ≥ 90%.
Organic fertilizer raw materials (animal manure, domestic waste, dead leaves, biogas residue, waste bacteria, etc.) are fermented into a semi wet material crusher for crushing, and then nitrogen, phosphorus, potassium and other elements (pure nitrogen, phosphorus pentoxide, potassium chloride, ammonium chloride, etc.) are added to make the mineral elements meet the specified standards, then stirred with a mixer, and then enter the granules of the new organic fertilizer granulation mechanism.
After drying, the screened qualified products are packaged by the screening machine, and the unqualified products are returned to the granulator for granulation.
Now this new type of organic fertilizer wet granulator is deeply loved by the majority of users. Our wet organic fertilizer granulator is in short supply. The birth of new products, new fertilizer manufacturing technology, energy conservation and environmental protection, trustworthy.
In addition to the disc granulator, the fertilizer granulator is mainly suitable for the production of large-scale compound fertilizer. The investment of relevant equipment is large, the construction time is long, the energy consumption is high, the production cost is high, and there are certain environmental pollution problems.
The extrusion granulation plant for producing multi-element potassium magnesium sulfate fertilizer has the advantages of small floor area, short process flow, convenient equipment operation, less construction investment and short construction period. Therefore, the compound fertilizer production line technology project is a short, flat and fast construction project, which has a certain popularization and application value in small compound fertilizer equipment production enterprises.
Extrusion granulation of compound fertilizer production line is to extrude materials by external force. The granulation process does not need steam, which can save boiler construction investment and coal production cost. The compound fertilizer production line does not introduce water and has no drying process in the whole production process, which eliminates the large and expensive dryer in the traditional compound fertilizer production line equipment, and can be dried with fuel and drying equipment.
Therefore, the process of this compound fertilizer production line meets the needs of today’s energy-saving society.
3. In the traditional nitrogen, phosphorus and potassium fertilizer production line, hot blast stove and preheated air are used to dry the materials in the production process. Burning coal in hot blast stove will produce a certain amount of sulfur dioxide gas and pollute the atmosphere.
4. The fertilizer is less affected by the external environment (such as temperature and humidity) in the production process, with great operation flexibility and flexible process formula.
5. The compound fertilizer production line has high pelletizing rate, low moisture content, high particle strength, less system return and less caking in the production process, which has good economic benefits.
1. Compost Dumper: industrial fermentation treatment of organic solids such as livestock manure, domestic waste, sludge and crop straw. The equipment integrates the uniformity of fermentation materials. Therefore, the front of the fermentation tank can be freely put in or taken out, and waste such as feces can be retained for a long time.
2. The mixer has fast mixing speed and good uniformity. It can mix 30% liquid and add viscous materials. There are two rotors working in opposite directions. Because the blade has multiple special angles, it can mix quickly and efficiently regardless of the shape, size and density of the material. The lower door opening speed is fast and the residue is less.
6. The rotary dryer is mainly composed of rotating body, lifting plate, transmission device, support device and sealing ring, with diameter of: Φ 1000- Φ 4000, the length depends on the drying requirements. Collect the dried product from the bottom of the bottom.
7. Drum screen adopts combined screen, which is convenient for maintenance and replacement. The machine has the advantages of simple structure, convenient operation and stable operation. Drum screening machine is mainly used for the separation of finished products and returned materials. It can also realize the classification of finished products and uniform sorting of finished products.
8. The coating machine is composed of screw conveyor, mixing tank, oil pump and main engine, which can effectively prevent the caking of compound fertilizer. The main body is made of polypropylene lining or acid resistant stainless steel.
9. The packaging machine is mainly composed of feeding mechanism (gate), weighing bucket, bag clamping mechanism, frame, air inlet, pneumatic system, sensor, control box, conveying and sewing mechanism.
How to improve the product output and output, the key lies in the organic fertilizer granulator.
1、 According to the moisture, fineness and cohesiveness of raw materials.
Powder raw materials form spherical particles through the attachment of water. Therefore, controlling water and making water uniform have become the key factors to improve yield. The lower the moisture content, the lower the granulation rate, the higher the moisture content, the more large particles, the uneven moisture, the smaller the particle size, and the lower the yield.
2. Material fineness
It is needless to say that the material fiber has natural coarse granulation effect, rough and brittle appearance and poor formability. The higher the fineness, the better the formability and the smoother the particles.
3. Is the material sticky
In particular, organic fertilizer granulation, general raw animal manure (chicken manure, pig manure, cow manure, sheep manure, pigeon manure, etc.), straw (corn straw, straw, leaves, etc.), fungus residue, sugar residue, drug residue, monosodium glutamate residue, etc. The viscosity of general materials is poor, so some viscous fillers such as bentonite need to be added.
2、 Fertilizer granulator is selected for organic fertilizer production line.
If columnar is produced, ring mold granulator and columnar extruder are selected.
For irregular and flat ball type, select the appropriate drum extrusion granulator (depending on the die).
All kinds of granulation equipment have their own advantages and disadvantages. Different equipment shall be selected according to raw materials, investment cost (drying or not) and the needs of farmers.
The production equipment of biological fertilizer project mainly includes fermentation part and granulation part. Even if organic fertilizer raw materials are well fermented, granulation is difficult, because organic raw materials are characterized by rough raw materials, light weight and low binding rate.
The bio organic fertilizer production line includes main equipment:
1. New type organic fertilizer granulator: designed and manufactured by the new process of wet continuous granulation. The machine can not only granulate a variety of organic materials, especially coarse fiber materials that are difficult to granulate by conventional equipment.
2. Tipping machine: used for tipping and composting to improve fermentation speed and quality.
4. Conveyor: it is suitable for conveying loose materials or box items in coal, metallurgy, mining, chemical industry, building materials, wharf, warehouse and construction site, especially in chemical fertilizer plant, cement plant and other environments.
5. Packaging scale: the packaging scale is mainly composed of automatic quantitative packaging scale (composed of storage hopper, feeder, weighing bag hopper, pressing mechanism, computer control, pneumatic actuator, etc.) and optional items (conveyor, sewing machine, etc.)/ Heat sealing machine).
There are several key factors to pay attention to in the selection of equipment: fermentation mode, organic raw materials, degree of mechanization and annual output. The quality of organic fertilizer depends on the fermentation site and the formula of the product.
The key factors of fermentation are: microorganism, carbon nitrogen ratio, carbon phosphorus ratio, water, pH value and aeration control. If a factor is not well controlled, it will cause incomplete fermentation, incomplete fermentation or too long fermentation time.
The formula of organic-inorganic compound fertilizer is the same as that of inorganic fertilizer. It also depends on different soils and different crop formulations. If the fermentation is properly prepared, the effect is better than inorganic fertilizer and the cost is low. As a green fertilizer, it can also improve the environment of plant survival and soil granulation.
Process design description of NPK fertilizer production line: 1. Batch processing:
Electronic batching or disc batching. 2. Crushing process:
The mixed fertilizer proportioned according to the design requirements is sent to the raw material crusher for raw material crushing. The purpose is to crush various raw materials to a certain fineness. Basically, the particle size of raw materials is less than 1mm, which is conducive to the material in the granulator. Roll inside to meet the standard ball.
3. Granulation process:
The crushed mixture is conveyed to the fertilizer granulator through the conveyor. The liquid phase provided by the slurry or water in the extrusion granulator makes use of the centrifugal force brought by the rotation of the fertilizer granulator to turn the material into organic fertilizer. At present, it is better to use the disc granulator to produce organic fertilizer. The granulation rate of disc granulator can reach more than 90%, but the table output is low. 4. Drying process:
The granular materials are transported to the rotary three drum dryer through the conveyor. The hot blast stove is set at the inlet of the dryer to provide heat for the drying of materials in the dryer and evaporate the water in the formed materials into water. The steam is introduced into the dust collection chamber through the fan to remove dust. After the material enters the dryer, the liquid phase of the material is high and the ball strength is low. In order to ensure the sphericity of the material, we used it in the design of the dryer. 5. Cooling process:
The moisture content of materials after drying generally can not meet the water content requirements of organic fertilizer. Cooling in the cooler is very important for the NPK fertilizer manufacturing process. 6. Screening process:
The cooled organic fertilizer still has a certain temperature. After the organic fertilizer material enters the screening machine, the organic fertilizer material is roughly classified, and the screened fine powder is directly returned to the granulator for granulation. After screening, the screened coarse material is crushed by the return chain crusher, and then returned to the granulator for re granulation. The finished product is directly sent to the silo of the packaging scale. On the other hand, compound fertilizer materials are also used for screening projects. Cooling engineering plays a certain role in reducing temperature and preventing material caking. 7. Packaging process:
The coated finished organic fertilizer enters the silo of the packaging scale, automatically counts according to the set quantity, then puts it into the packaging bag, and then through the automatic sewing system, the sewn compound fertilizer can be stacked in the silo. Warehouse. In principle, the height of each stack shall not exceed 8 bags and the height shall not exceed 10 bags. The ground must be damp proof.
From a technical point of view, the important factor in the formulation design of extrusion granulation products in NPK fertilizer production line is the characteristics of materials. Next, we discuss another aspect of the influencing factors, that is, the influence of the type of raw materials on the formula.
1. Material compatibility
Theoretically, any proportion of NP or K base fertilizer can be prepared, and trace elements and even pesticides should be added if necessary. However, materials must be limited by compatibility. The substances in the formula shall not have chemical reaction in the process of fertilizer manufacturing, and occasional reaction shall not be allowed.
2. Effect of urea on formula
The international fertilizer center has done a lot of experiments on the effect of urea on the performance of compound fertilizer, although the report does not mention the same example as the product formula we are studying, and most experiments do not carry out granulation on extrusion. Yes, but its conclusion is still useful to us.
Because urea absorbs moisture easily, the critical relative humidity of NPK compound fertilizer decreases significantly. At the same time, the international fertilizer center also found that this effect is more serious when potassium chloride is used as the potassium source of compound fertilizer.
The production capacity of the dryer must be determined by many factors. Some urea based NPK fertilizers begin to soften at 70 ℃. If the outlet temperature of the dryer is higher than this temperature, the fertilizer particles will be too soft, the granulation process will be out of control (the particles are too large), and the internal scabs will form. Drying causes difficulties in screening and transportation.
In the same report, the international fertilizer center also tested other aspects of urea, such as water absorption, moisture permeability, water holding capacity, particle integrity, fluidity and agglomeration. The result is negative, which will have an adverse effect.
In short, the formula design test and production of extrusion granulation products in compound fertilizer production line show that the use of urea in compound fertilizer will encounter great trouble, not only because it affects the storage and transportation performance of products, but also because it also has a certain impact on the production process.
4. Ignite the hot air oven to preheat the dryer and start the dryer at the same time. Do not rotate the cylinder to prevent the cylinder from bending.
5. According to the preheating condition, the wet material is gradually added into the drying cylinder, and the feeding amount is gradually increased according to the moisture content of the discharged material.
6. The preheating of the dryer needs a process, and the hot blast stove should also have a preheating process. Sudden fire is prohibited. Prevent local overheating and uneven thermal expansion and damage.
7. Fuel combustion value, thermal insulation quality of each part, moisture content of wet material and uniformity of feeding amount affect dry product quality and fuel consumption. Therefore, it is an effective way to improve economic benefits to make each part reach the state as much as possible.
8. In the working state, the roller frame shall be filled with cooling water.
9. All lubricating parts shall be filled in time.
10. During shutdown, the hot blast stove shall be closed first, and the drying cylinder shall continue to rotate until it is cooled to close to the outside temperature.
The biological fertilizer project is made of organic wastes such as crop straw (such as straw and wheat straw), edible fungus nutritional residue, inorganic minerals (salts such as salt mine and phosphate mine), animal manure (chicken manure and cow manure) as raw materials for bio fertilizer production, and then mixed with a certain amount of microbial flora, accumulated, high-temperature fermentation, decomposition, sterilization, amino acids, nitrogen and phosphorus, Potassium and other nutrients needed by crops are nutrients for crops to absorb.
In short, it is divided into the following steps:
Pretreatment: after the compost material is transported to the storage yard, it is weighed by a balance and sent to the mixing and mixing device. It is mixed with the production and domestic organic wastewater in the plant, and compound bacteria are added.
The fertilizer moisture and carbon nitrogen ratio are roughly adjusted according to the raw material composition. After mixing, proceed to the next step.
One time fermentation: the mixed raw materials are sent to the fermentation tank by the loader and stacked into a fermentation pile. The fan is used for forced ventilation and oxygen supply from the bottom of the fermentation tank. At the same time, the compost dumper is used for 2 days.
Add water (mainly produced in the factory, mainly domestic organic wastewater) and nutrients, control the fermentation temperature at 50 ℃ ~ 65 ℃, aerobic fermentation. The first fermentation cycle of the project is 8 days. After each pool of raw materials and one pool of daily semi-finished products, the fermentation semi-finished products are discharged and ready to enter the next process.
Post treatment: the finished compost is further screened, and the screened materials are treated according to the water content. After granulation, the particles are sent to the dryer heated by biogas in the biogas digester for drying, medium and trace elements are added in proportion, then mixed into finished products, packaged and stored in the production of bio organic fertilizer.
The process has been sold. The screened materials are returned to the crushing process for reuse.
Let’s take a look at the process conditions and process settings of organic fertilizer production.
150000 tons of livestock manure and industrial waste are used, and the actual annual output of finished organic fertilizer is about 100000 tons. The production process is as follows:
1. Floor strip stacker, floor dumper or material fermentation tank, trough dumper.
2. Evenly sprinkle microbial agent, turn over and ferment to reach the temperature, smell, decompose and kill bacteria.
3. Fermentation for 7-12 days, with different times according to different temperatures.
4. Completely ferment and decompose, and then leave the pond (the ground type is directly stacked by forklift).
5. Sieve the thickness with a grading screen（ The filtered powdered fertilizer can be sold directly).
6. The screened large pieces are crushed by the crusher and returned to the grading screen.
7. Mix the required trace elements with a premixer.
8. Granulation with fertilizer granulator
9. Enter the dryer and cooler.
10. Automatic packaging machine for sale.
Fertilizer manufacturing process
1. Soil dumper, or trough type soil Dumper: the soil dumper does not need to build a trough, and directly piles the materials. The wheel soil dumper is used for straddle stacking fermentation. Trough fermentation is adopted. According to your production scale, six fermentation tanks with a length of 6 meters and 40-50 meters are built. The fermented materials are continuously put into the fermentation tank, and the turning machine is used for turning and polishing to control water and mixing. Unified purpose can save a lot of labor. Can achieve the goal of full maturity.
3. Screening machine: the fermented organic fertilizer is screened to separate the large blocks and impurities inside, which is convenient for crushing and packaging.
4. Crusher: separate and crush the large impurities and stones in the screened organic fertilizer to ensure the appearance of the product.
5. Premixer: premix the screened and crushed organic fertilizer to ensure the stability of product quality. At the same time, when adding fertilizer and trace elements, it plays the role of mixing and producing special fertilizer and various compound fertilizers.
6. Granulator. The material is granulated.
7. Dryer and cooler: dry and cool the particles.
8. Packaging machine: organic fertilizer granules are directly granulated and sold.
Steps and equipment required for making organic fertilizer:
1. Ground strip stacker, crawler tipper, or material fermentation tank, trough thrower
2. Evenly sprinkle microbial agent, turn over the pile for fermentation, heat, smell, decompose and kill bacteria
3. Ferment for 15-20 days. According to different temperatures and times, use the dumper to improve the fermentation speed.
4. Complete fermentation, decomposition and out of the tank (ground type, direct stacking with forklift)
5. Coarse and fine screening with screening machine (the screened powdery fertilizer can be sold directly)
6. The screened large pieces are crushed by the crusher and returned to the screening machine.
7. Mix the required trace elements with a premixer,
8. Granulate with fertilizer granulator.
9. Enter the dryer and cooler for drying and cooling.
Maintenance method of organic fertilizer granulator:
1. Start preheating and replace grease.
2. Replace the gear oil.
3. Reasonable maintenance, full and reasonable maintenance is very necessary.
4. Replacement of vulnerable parts. Vulnerable parts are the main working parts of the new organic fertilizer granulator.
5. Humanized production. The humanized culture and humanized operation of the equipment is a warm measure to ensure the normal operation of the machine.
Introduce the steps and equipment required for making organic fertilizer and the maintenance knowledge of the equipment. Hope to help you.
1. The strain and fermentation raw materials are mixed for fermentation, and the pile is turned over by a dumper during fermentation.
2. The mature raw materials are crushed and screened after decomposition, and then enter the granulation workshop through the elevator.
3. After the organic fertilizer is mixed by the raw material premixer, it enters the fertilizer granulator for granulation.
7. The dust generated during drying and cooling is divided by the air entering the dust removal device.
8. The cooled particles are then transported to the screening machine by the conveyor.
9. The dispersed organic fertilizer particles enter the quantitative packaging equipment for packaging through the conveyor belt to become finished organic fertilizer.
There are many kinds of organic fertilizer production equipment in the above organic fertilizer production process, such as fertilizer granulator, including disc granulator, flat mold granulator, new organic fertilizer granulator, etc.
Bbfertilizer is a special fertilizer made by simple BB fertilizer production equipment sx, which adjusts the proportion of mixed base fertilizer according to local soil conditions and crop nutrient demand. BBF formula is a kind of fertilizer which is more convenient and easy to be popularized.
The utilization rate of BBF is high, which has a significant effect on crop yield. Taking a common peanut as an example, the peanut with bbfertilizer had rapid emergence, early flowering period, stable growth in the whole growth period, no early senescence in the later stage and less diseases. The special BB fertilizer for peanut can improve the appearance of peanut, increase the number of effective branches, increase the number of saturated fruits, reduce the number of dried fruits and increase the yield of peanut.
Bbfertilizer is a kind of formula fertilizer which is developed according to the law of crop fertilizer demand, the law of soil fertilizer supply and the principle of scientific fertilization. Two or more kinds of high-quality fertilizers with similar grain size, such as nitrogen, phosphorus and potassium, are mixed uniformly by mechanical stirring.
Bbfertilizer production process is very simple, it does not need too much equipment investment and maintenance costs, and the production process is free of pollution and energy consumption is beyond the standard, which is a common equipment for small and medium fertilizer enterprises. Basic bbfertilizer production equipment includes batching system, bbfertilizer mixer, belt conveyor and packaging machine. Bbfertilizer mixer is the core equipment of bbfertilizer production and processing.
Its production capacity can reach 10000 kg per day. Bbfertilizer mixer adopts lifting tank feed and mixer loading, almost zero waste of materials.
Belt conveyor is used to transport fertilizer materials in different production processes in the whole organic fertilizer production line, from the batching system process, crushing process, mixing process, to granulation process, drying and cooling process, screening process and re granulation process, and automatic packaging process. The use of belt conveyor saves a lot of working pressure and improves the working efficiency.
Belt conveyor is widely used in metallurgy, mining, coal, port, transportation, hydropower, chemical industry and other departments to load, unload or pile up various bulk materials with high density and room temperature.
The transportation volume is large, the structure is simple, the maintenance is convenient, the cost is low, and the universality is strong. Single or multiple units can be used to transport materials, and horizontal or inclined layout can be adopted according to technical requirements. In addition, it can be transported by convex arc section, concave arc section and straight line section.
The unit weight of the conveyor is determined by the bandwidth, speed, slot angle and inclination angle. It also depends on the frequency of high-speed materials. The working environment temperature of conveyor is usually -25 – +40 ℃, and our company can also produce light belt conveyor and mobile conveyor.
Belt conveyor structure:
1. drive part
2. rolling part
3. drum part
4. cleaning part
5. unloading part
6. brake part
In the process of making a series of special fertilizers, inorganic nutrients and minerals should be added according to different soil conditions and different crops. These minerals are concentrated in organic matter and trace elements, so that the fertilizer contains various nutrients needed for plant growth, such as nitrogen, Phosphorus, potassium, sodium, manganese, zinc, copper, etc.
According to the formula, nitrogen, phosphorus, potassium and fermentation material are mixed by computer and transferred to granulator for granulation. We mix organic and inorganic materials according to different series of products, and mix them well in blender. Assume that the proportion of organic materials is 12%, about 12 tons.
The production process should not be exposed to high temperature and other characteristics due to the poor formation conditions of bio fertilizer mainly composed of organic matter and cellulose and the viable bacterial population with the function of making fertilizer.
Disc granulation and drum granulation are not suitable for building materials, because these two technologies require fine grinding of raw materials, high moisture content of granulation, and generally the moisture content is about 30%, so the load is relatively large. There are different types of fertilizer granulators for your fertilizer granulation process.
For drying, the loss of effective bacteria is great, and the pelleting rate is low (about 60% – 70%), the dust is heavy, and the operating environment in the production process is poor.
Therefore, through the extrusion environment, the requirements of raw material crushing are low, the molding rate is high (more than 95%), the water content of formed particles is low, the drying load is low, the environment is dry, and the production of organic biological functions should be better. Can reduce the loss of effective bacteria, less dust and good working environment.
70 tons of organic fertilizer raw materials, using organic fertilizer special granulator. After granulation, the material is sent to the dryer by belt conveyor for drying. The particle size is 3.0-4.0 mm, and the granulation rate is more than 70%.
The recommended pelletizer is a new type of pelletizer for organic fertilizer.
(4) Drying (fertilizer dryer)
In the production process of biological fertilizer, not only does the moisture content of granules generally exceed the index after molding and need low-temperature drying, but also the moisture content of organic matter after fermentation is about 30% – 40%, and the granule after granulation is generally between 15% – 20%, which needs drying treatment, because the moisture content of fertilizer quality index is less than 14%.
The drying stage is an essential and important process in the production of biological fertilizer, which directly affects the yield, quality and energy consumption. It is very important to choose the type and specification of dryer and control the process conditions.
In order to avoid the death of effective living bacteria due to the high temperature in the drying process, the drying temperature of materials should not be higher than 60 ℃ (usually about 50 ℃). Therefore, the temperature of hot air in contact with materials should be different.
For the moisture content of different materials, generally not more than 130 ℃, it is better to control the hot air temperature by stages, which can not only improve the thermal efficiency, but also effectively avoid the death of living bacteria.
According to these characteristics, the belt dryer is suitable, because it is suitable for low temperature and low humidity drying, and it can control the temperature of hot air in sections to ensure that the material temperature is not higher than the drying temperature, and maintain the highest temperature in the whole process.
The tail of the dryer can also add natural air cooling part, and cool the material immediately after drying, It can be used many times.
It is very suitable for granular biological fertilizer, with drying permeability, stable and uniform drying of materials, no damage to particles, adjustable residence time and feeding speed to achieve the best drying effect, because most of the thermal circulating air has high thermal efficiency, and the heat source can be used.
There is a secondary granulation area in front of the steam dryer provided by the biogas boiler, The material can be granulated there. Then, the material is lifted up through the plate to be completely dried. The exhaust machine exhausts the humid hot air through the pipe at the end of the dryer, and the air enters the precipitation chamber for precipitation.
After precipitation, the tail gas is removed by the washing tower, and the ejected water is pumped out for recycling. After secondary dust removal, the waste gas is discharged into the atmosphere through the chimney.
(5) Cooling (drum cooler)
The dry material is cooled by belt conveyor and sent to cooler. The cooling process mainly includes using fan to send natural air to cooler through pipe to cool the material.
The wind direction in the cooler is counter current. The waste gas pumped into the settling chamber by fans and pipes is treated and discharged into the atmosphere as dry waste gas
After cooling, the material is screened, the crushed large particle material and the screened powder are transported to the granulator through the return belt for granulation, and the final product is packaged in the automatic packaging system.
With the improvement of people’s living standards, it has become a new trend to buy natural and organic food from the dining table.
Therefore, we have to mention the way food is grown in our daily life – organic farming. It’s a way that all farmers and all growers are constantly looking for to ultimately increase production and make their food natural, organic and healthy, thus meeting market demand.
Here, we have to mention organic fertilizer, because without organic fertilizer, we can not have too many healthy vegetables, fruits, meat and milk, so the production of organic fertilizer is the key factor.
If you have dairy farms, pig farms, fruit, vegetables, flowers, trees planting base, then choose the appropriate fertilizer and advanced organic fertilizer production equipment is very important.
Benefits of organic fertilizer:
Organic fertilizer is the safest and most effective way to improve the healthy growth and increase the yield of plants, which are some common benefits of organic fertilizer for healthy planting and harvest.
1. Improve the fertilization rate of soybean
Organic fertilizer contains comprehensive, constant and balanced nutrients, such as nitrogen, phosphorus, potassium and other trace elements, which can promote siol’s water retention, nutrient retention capacity and soil structure, so as to completely improve soybean fertility. By absorbing the best nutrients in the soil to provide effective plant growth, it is beneficial and healthy, and the final product quality and crop yield will change significantly.
2. Reduce damage to plants.
The finished organic fertilizer after composting and fermentation can reduce the damage to plants, because untreated organic fertilizer should not be used, because fresh fertilizer containing dangerous bacteria may damage crop roots, some may adhere to crops and cause direct pollution, and some may enter the soil. Soil can also cause indirect pollution, including grass or weed seeds and organic compounds that are not conducive to crop growth.
In addition, the unfermented feces can only be absorbed by crops after fermentation, and the fermentation process can be significantly completed by turning the fermented compost to machinery, because in this process, the organic waste will be decomposed by mycelium and turned into organic fertilizer, because the process is very slow.
During the process, the risk of overfeeding and burning of plant roots will be reduced; Organic fertilizer production lines are not as nutrient rich as synthetic fertilizers because they can burn their roots and damage seedlings. Organic fertilizer production lines can meet all the requirements of producing high quality and uniform organic fertilizer.
Farm manure will be recycled and converted into organic fertilizer, which is a renewable resource. According to different organic raw materials, it can be reprocessed into powder, particle and ton bag organic fertilizer, which can be absorbed by plants. The new organic fertilizer granulator is a kind of fertilizer granulator with simple operation and high efficiency. It can recycle animal manure and reduce environmental pollution.
Slow release organic fertilizer also has the advantage of enhancing the environment. Unlike chemical fertilizers, they are water-soluble, which allows any excess unused fertilizer to be washed away by rain or large amounts of watering, and eventually into groundwater and contaminate streams and lakes. Organic fertilizer can improve the water retention capacity and nutrient absorption capacity of siol, and reduce the possibility of leaching.
4. Increase profitability
More and more organic and natural fertilizers are loved by plant growers. If you have a lot of organic raw materials in your farm, then the finished products and qualified organic fertilizers are evenly packed in bags through automatic packaging machine. It must have a better market and increase additional profitability for you. Organic fertilizer has many advantages.
It is an ideal product for the majority of users. The project has also won the approval of the soil durable fertilizer Station of Henan Provincial Department of agriculture, which is a national environmental protection technology promotion project.
The characteristic of organic fertilizer machine is that fermenting organic fertilizer can improve the soil and is easy to absorb. Rich in organic matter and humus, improve the ability of nitrogen fixation of phosphate fertilizer, melt water, promote plant absorption.
It can stimulate the growth of roots, promote the absorption of nutrients, and effectively improve the absorption and utilization of nutrients.
The fertilizer fermented by organic fertilizer equipment is a kind of nutrient rich organic fertilizer, which contains a lot of organic matter and high content of three elements.
The contents of organic matter, nitrogen, phosphorus and potassium were 25.5%, 1.63%, 1.54% and 0.85%, respectively.
Organic fertilizer granulator has the characteristics of low energy consumption, less land occupation and flexible application. It adopts small intensive design, and its land occupation is the same as that of organic fertilizer equipment with the same output, which greatly saves the land occupation area and improves the flexibility of application.
Secondly, it is necessary to use semi wet material crusher equipment of organic fertilizer to crush livestock manure and raw materials. Raw material matching is one of the important processes of organic fertilizer production line.
The complete organic fertilizer production line includes three processes
2. It is especially suitable for high viscosity materials. The material of fertilizer granulator should meet the production requirements of pressure, temperature and catalyst resistance, and keep the product clean. Due to the different materials of fertilizer granulator, the production process and structure of fertilizer granulator will be different, so it can be divided into steel, lining equipment, etc.
The complete organic fertilizer production line includes three processes
3. High temperature energy can be obtained after the raw materials are dried, and the next step is to cool them at low temperature. Since water cannot be used for cooling, it is necessary to separate the contact between material and water through cooler. The screening machine will screen unqualified organic fertilizer particles. The screening equipment has the advantages of high efficiency and easy operation. More details, go to https://organicfertilizerplants.com/organic-fertilizer-production-process/
The special granulator for organic fertilizer is a kind of fertilizer granulator. After fermentation, it is used for pelleting various organic substances. There is no need to dry and crush raw materials before granulation. Spherical particles can be directly processed by batching, which can save a lot of energy.
Organic fertilizer granulation equipment is an important equipment in organic fertilizer production line. If the production of granular organic fertilizer is not good, it will directly affect the quality and effect of organic fertilizer. Then the granulator of organic fertilizer should pay attention to the production of organic fertilizer. Do you have any details?
1. The organic fertilizer granulator shall be equipped with two powder boxes for granulation, so that the granulator does not need to stop when changing the formula.
5. The finished granular organic fertilizer should be packed in the finished product warehouse. Pay attention to the storage environment, so as not to affect the use effect of organic fertilizer.
The above are some details that should be paid attention to during the operation of organic fertilizer granulator. It not only saves a small amount of power input, but also effectively reduces the cost, and improves the efficiency, convenience and speed of the task.
The new organic fertilizer granulator also realizes higher organic content and the exclusive production of pure organic fertilizer.ra
A lot of garbage produced by residents every day can be used, and can be processed into organic fertilizer raw materials after secondary treatment. The market position and broad development prospect of organic fertilizer production equipment can be predicted. Automatic organic fertilizer production line is the most skilled equipment in the industry.
It can work independently without help, and has high precision, avoids the waste of resources, improves the qualified rate of products, and improves the qualified rate of products. Save a lot of unnecessary economic expenditure. It can not only save costs for the company, but also create greater economic benefits for the company, with higher output, so that the goods can enter the market at the fastest speed and the best time, and obtain a higher market share. sales volume.
Today, the development of organic fertilizer production equipment has expanded to high-speed, complete set, highly automated and diversified fields. The diversified development of organic fertilizer production equipment is inseparable from the efforts and struggle of enterprises, because in the face of such a development environment, if we want to further the development of enterprises, we must let the domestic market organic fertilizer production equipment is moving towards the road of automation.
The equipment needed for the production of biological fertilizer will make a difference in the limited market. Some technologically backward, smaller manufacturers will be driven out of the market and forced to shut down. Therefore, if you want to have a larger application group forever, you must do a good job in communication with customers, do a good job in market research, and finally make the organic fertilizer production equipment better meet the demand and serve the public.
So is organic fertilizer. In the past, farmers used accumulated organic fertilizer directly. Nowadays, with the improvement of living standards, high-tech equipment is also used for large-scale production of organic fertilizer. Is to make life more convenient production of production equipment.
Organic fertilizer production line uses organic fertilizer fermentation technology to process animal manure into harmless fertilizer, involving two kinds of probiotics, one is mature bacteria, the other is functional bacteria, which play different roles. The former is a kind of rotten animal manure, while the latter is used to regulate the effect of organic fertilizer.
What kind of bacteria are these probiotics?
Rotting bacteria is a new generation of high efficient manure decomposition agent independently developed. The product contains bacillus, mold and other complex microbiota, rich in protease and cellulase, with the advantages of fast deodorization, strong activity and h
igh efficiency! It has the following functions:
1. Treatment of harmful bacteria in animal feces.
Through continuous high temperature and microbial balance, harmful bacteria, insects, eggs, grass seeds and other crop pests in feces can be quickly and completely killed, and the reproduction of pathogens is inhibited.
2. Deodorize and improve environmental quality
Deodorization is one of the main characteristics of organic fertilizer fermentation. Rotting bacteria can decompose organic matter, organic sulfide, organic nitrogen and so on, which can inhibit the growth of rotting microorganisms and greatly improve the environment of the site.
3. Rich nutrients
In the process of treatment, nutrients change from ineffective and slow effective state to effective and fast action state. To form natural materials with excellent water absorption and retention characteristics, prevent the loss of fertilizer and water, and become a good natural protective film of soil, so as to achieve the role of nutrient enrichment.
Organic fertilizer production line is the production line of organic fertilizer particles and organic fertilizer powder. As we all know, if you want to granulate organic fertilizer, you must first make it into powder, and then granulation, so the powder production line is an important part of the particle production line.
Now, I will introduce the process of the organic fertilizer production line in detail together with the granular organic fertilizer production line. According to the process layout, the process flow of granular organic fertilizer production line is: Fermentation – crushing – mixing – granulation – drying – Screening – Coating – packaging. The technological process of powdered organic fertilizer includes the above four processes (fermentation, crushing, screening and packaging).
The preparations for the construction of the organic fertilizer processing plant are as follows:
1) The construction of organic fertilizer production line should meet the requirements of environmental protection policy. Environmental protection is not only the desire of the people, but also the policy requirement of the development of agriculture and animal husbandry for environmental protection.
2) The source of raw materials and its surrounding radius determine the location of the factory, site investment, transportation investment, etc.
In the process of organic fertilizer production, powder materials are transported to disc granulator by belt conveyor. The inclination angle is 50 ° The turntable rotates with the material. Like rotary drum granulators, disc granulators use wet granulation to shape particles.
When the material reaches a certain height, its gravity and inertia separate from the disc, slide along the bending path, and complete the rolling required by granulation under the action of force.
At the same time, the liquid sprayed by the spraying system is evenly sprayed on the rolled material to condense into particles, so as to complete the whole granulation process.
Biological fertilizer, namely microbial fertilizer, referred to as bacterial fertilizer, also known as microbial inoculant. It is a special microbial product, which contains a lot of beneficial microorganisms, which can fix nitrogen in the air and activate nutrients in the soil.
In the soil, improve the nutritional environment of plants, or produce active sunlight in the life activities of microorganisms and stimulate the growth of plants. In the production of bio organic fertilizer, bio fertilizer is as important as chemical fertilizer and organic fertilizer.
In fertilizer production line for bio fertilizer, this series of fertilizer machine can use simple composting machine to ferment raw materials, and the fermentation machine will be equipped with fermentation composting machine.
Then, fertilizer crusher, fertilizer mixer and fertilizer crusher will be equipped to deal with the raw materials. We can use chain crusher and horizontal mixer to deal with organic raw materials. Next, in the production of organic fertilizer granulator, it must be equipped with fertilizer granulator in the bio fertilizer production process.
China has a vast territory and rich raw material resources for organic compost equipment. It is understood that the final urine excreted by a pig in a year can be combined with bedding material to produce 2000-2500kg of high-quality organic compost, which is enough for one mu of land to use chemical compost throughout the year. The content of components is more than 6%, and the content of organic matter is more than 35%, which is higher than the national standard.
In the organic compost production line, we can use the drum granulator, or we can equip the drum granulator in the organic compost production line to complete the production process of NPK compost granulator. The granulation method completes the production process. This is different from rolling compost granulator, which usually uses dry granulation method to produce compost granulator.
In the bio organic compost production line, different types and series of compost equipment should be equipped to complete the production process. These machines play different roles in the compost manufacturing process.
In the production of compost granulator, the compost granulator should be designed and equipped on the production line to manufacture bio organic compost granulator. In the biological compost production line, we can use the flat mold granulator to manufacture the biological organic compost granulator, and we can also use the drum granulator. Complete the granulation process on the production line.
Advantages of using Cow Dung Powder Fertilizer Production for Agricultural Application
It is really an age-old tradition to utilize cow dung within the garden. Most farmers use fresh cow manure within their fertilizers to enhance crop production. But, fresh cow dung contains high amounts of ammonia. This usually contributes to plants dying when the farmer applies the manure directly. This is why modern farmers use cow dung powder rather than the raw product. They offer lots of benefits that other manure may not offer.
Elements of cow dung powder
Cow dung powder is a mix of numerous things. While the dung includes digested grains and grass, the powder used for fertilizer production experiences a composting process. Cow dung contains approximately 1% potassium, 2% phosphorus, and threePercent nitrogen. Aside from these three essential elements, furthermore, it has a high portion of ammonia that is certainly harmful for pathogens. That is why farmers use composted cow dung to ensure that it doesn’t include the harmful ammonia gas.
Functions of cow dung powder for agricultural applications
Composted cow dung powder adds a lot of organic matter inside the soil that promotes crop growth. It improves the moisture-holding capacity from the soil. So, farmers should water their crops less often. Countries that have scarce water supply use cow dung powder fertilizers to make sure they don’t need to rely heavily on water. The roots of the crop use additional nutrients and water whenever required.
As well as increasing moisture-holding capacity, cow dung powder fertilizer also improves soil aeration. It breaks down the compacted soils and increases porosity, allowing the crops to grow quickly. The healthy bacteria within this sort of fertilizer converts nutrients to several accessible forms that release the main minerals slowly and steadily without burning the tender crop roots.
Composting cow dung powder
Cow dung powder is not only employed in the fertilizers and also spread like a top dressing on crop soil. This nutrient-rich fertilizer is suitable with regards to producing fresh crops at the outset of the growing season.
The composting process starts by collecting cow dung and mixing it with relatively lighter materials, like hay or straw. Several of the other ingredients employed in the compost mix are ash, lime, garden debris like leaves and twigs, and vegetable matter. Most manufacturers produce mass-scale cow dung fertilizer. So, they need sufficient space to permit the pile to obtain enough air.
Many farmers who require cow dung powder fertilizer in small quantities can make exactly the same in their home. Since it doesn’t require excessive heat, the farmer are able to keep the manure beneath a shade and keep twisting and turning it to provide air. Alternatively, manufacturers producing this fertilizer in big amounts use composting machines that mix the ingredients in equal quantities. They could control the temperature as well as twist and turn the manure periodically.
This is amongst the most inexpensive fertilizers in the agricultural sector. But, it will help to produce a high-quality crop, and that’s why most farmers apply it widely all over the world.
Raw materials for NPK fertilizer production: raw materials include urea, ammonium nitrate, ammonium chloride, ammonium phosphate, potassium, chloride, etc., which are provided in a certain proportion.
2. Raw material mixing: evenly mixing the prepared raw materials to improve the uniform fertilizer efficiency of the whole fertilizer particles. In the production of NPK fertilizer granulator, roller granulator can be used to complete the fertilizer production process.
And series fertilizer equipment can also be used in the production process of organic fertilizer.
The production of organic fertilizer or bio fertilizer granulating machine can use fertilizer manufacturing technology, and a complete fertilizer production line is designed to produce pelletizer, and different types of fertilizer machines are equipped in the process of fertilizer manufacturing.
The so-called bio organic fertilizer production line is actually the ordinary organic fertilizer production line. The main reason for the difference between biology and common organisms is that in the process of production, the production line of bio organic fertilizer increases the link of adding microbial agents, which leads to the final production of organic fertilizer and bio organic fertilizer.
The production line is organic fertilizer fermentation. In order to better explain the difference between the two production lines, let us first understand the difference between the production process of organic fertilizer and the production process of biological organic fertilizer.
Flow flow of organic fertilizer production line:
The basic process of the production line is as follows: the use of fermentation compost dumper to collect raw materials, and then stack and ferment raw materials can save more time. Next, the raw materials are crushed by the fertilizer pulverizer, and then screened by the screening machine. Raw material, then premixed. Next, the granulator is made by a fertilizer granulator. After granulation, the granulator is treated with a dryer and a cooling machine. Finally, the screening machine is used to screen and pack the high quality fertilizer.
Process flow of bio fertilizer production line:
In the process of bio organic fertilizer production line, raw materials shall be collected first, then bio fermentation with organic fertilizer starter shall be used to complete fermentation of semi-finished organic fertilizer products, then premixes shall be crushed and then pelletized, and then the granulator shall be dried and cooled by the fertilizer dryer dryer and cooling machine. Finally, the second screen and the pelletizer are packed.
From the above two kinds of organic fertilizer production, we can see that fermentation is the first and most important link of organic fertilizer production, because the final use effect of the organic fertilizer is in this link.
At present, the growth of agricultural production generally depends on chemical fertilizer. On the one hand, it will cause environmental pollution. In fact, the non-point source pollution in rural areas is very serious, which has become a problem. On the other hand, it will affect the quality of agricultural products.
Therefore, people gradually realize that when using chemical fertilizer, we must increase the proportion of organic fertilizer, especially for vegetables, fruits, tobacco and other economic crops. The use of biological fertilizer can not only increase yield, but also improve quality and protect crops. Ecological environment, extensive use of municipal waste, sludge, livestock manure, orange and other waste. How to turn these organic materials into fertilizers, go to https://organicfertilizermachines.com/
The new technology of biological fertilizer production technology is used to produce biological fertilizer, which makes “grain fertilizer grain” form a virtuous circle chain. Therefore, biological fertilizer has become a new fertilizer and new fertilizer industry for the development of ecological home industry.
Organic fertilizer has the following characteristics:
1, rich in nutrients, high content, containing all kinds of nutrients needed for crop growth.
2. The effect of chemical fertilizer lasts for a long time, with both pre effect and post effect, which can fully meet the needs of various nutrients for crops in the whole growth period, but not in the late growth period. Interested in organic chemical fertilizer production？ Go here.
3. It is simple and convenient to use. It can be used as base fertilizer at one time. The method is simple, labor-saving and time-saving.
4. The cost is low, and the price of similar goods is the lowest.
5. High efficiency, input ratio is more than 1:10-30.
6. It is widely used in all kinds of soil and crops, including all kinds of greenhouse vegetables, fruit trees, cash crops, food crops, medicinal materials, flowers, lawns, seeds, etc.
Conditions for plant construction:
Reliability of raw material supply. The main raw material of this product is animal manure. Auxiliary materials include: peat, sawdust, straw, soybean cake, corn flour and other wastes. No more than 70 tons of raw material should be used per day.
Process of organic fertilizer production line:
The main ingredients include rice straw, pig manure, charcoal, etc.
The production process of organic fertilizer mainly includes: inoculation and fermentation of organic matter, main fermentation, crushing, ingredient mixing, drying, grading, cooling, screening, metering and packaging, etc.
In the granulation process, we need to pay attention to the design of different types of fertilizer models for different raw materials and fertilizer production lines. For example, in the organic fertilizer production line, we can use the disc granulator to produce the organic fertilizer granules, or we can choose the drum granulator, which is usually used in the NPK fertilizer manufacturing process to produce the compound fertilizer granulator to produce the organic fertilizer granulator Fertilizer granulator.
With the continuous development of economy, various negative effects caused by environmental pollution also follow. If we can not solve the problem of air pollution for the time being, the consequences will be more serious. While bringing adverse effects to people’s lives, it also directly leads to more dangerous diseases, which makes more and more users use the production process of organic fertilizer and worries many manufacturers. At the same time, users themselves are more worried about this situation. How does the organic fertilizer machine, disposal , welcome go to https://www.wastetofertilizer.com/
The use of users is more concerned by enterprises. In the development of new products, also according to the use of improved. When tracking the after-sales situation, manufacturers usually send appropriate manpower to interview users who purchase organic fertilizer equipment, and record various situations encountered in use, so as to facilitate future production and provide corresponding opinions to users. The use of users directly leads to the research and development direction of new products.
The main problem occurs in the normal use of the process, so it is necessary to conduct proper after-sales tracking. We give users a certain sense of security, provide them with suitable NPK fertilizer granulator, let users know their own equipment, the error will be reduced to a small.
The production process of organic fertilizer is suitable for the production of organic fertilizer in chicken manure, duck manure, goose manure, pig manure, cow manure, sheep manure, pigeon manure, rabbit manure and other common animal manure. If 10-20% plant straw is added, the effect will be better.
2. Production method: Sprinkle 20-30cm fertilizer. Sprinkle with grass powder, then sprinkle with manure thinner. Sprinkle fertilizer, rice straw powder and diluted bacterial solution again. After turning over, check the drying humidity of fermentation materials.
The drying humidity is about 60%, that is to say, hold the fermented material tightly with your hand, and feel the watermark on your hand, but there is no water drop. If the fermentation material is too dry, sprinkle appropriate amount of water when turning again. If the fermentation material is too wet, add dry manure or dry soil.
After mixing, pile up and cover with a layer of straw or film for fermentation. Use compost turning machine to process fermentation materials on time.
3. Fermentation time: 7-10 days in summer, 10-15 days in spring and autumn, and fermentation in plastic greenhouse in winter. The organic fertilizer after fermentation was dark brown, and the odor was reduced.
Fermented organic fertilizer
1. Mix the starter and fermentation material in proportion to start fermentation.
2. The fermentation process needs oxygen supply. Composting trucks are used to turn over materials and increase oxygen supply. Generally, fermentation can be completed in 5-7 days.
The organic fertilizer fermented in this way can be directly used as basic fertilizer for crops. If further treatment is carried out, other organic fertilizer equipment, granulator granulation, drying, cooling, bagging and selling as commercial fertilizer are required. More detailed info you want to know on organic fertilizer machines, go to https://organicfertilizerproductionline.com/compost-fertilizer-making-machine/
Slow release fertilizer: slow release fertilizer refers to the chemical fertilizer that slowly releases the effective nutrients of crops over time through the chemical or physical action of nutrients. One or two kinds of nitrogen and potassium nutrients have slow-release effect in slow-release fertilizer. Fertilizers with slow-release nutrients have slow-release fertilizers, but fertilizers without slow-release function are mixed together to make some nutrients have slow-release effect, and they will become partial slow-release fertilizers.
Main types: ordinary slow-release fertilizer can be divided into coated slow-release fertilizer and inhibitor slow-release fertilizer. There are many kinds of classification methods of coated slow-release fertilizer. According to the main components of coating materials, it can be divided into inorganic slow-release fertilizer. Generally, the coating formed by organic matter has better water resistance, smoother, thinner surface and slow-release effect than the conventional coating formed by inorganic matter such as sulfur Coated fertilizer, organic coated fertilizer and polymer coated fertilizer. The preparation of organic coated fertilizers is relatively complex and costly. The most important problems of organic and polymer coated fertilizers in soil may have a greater negative impact on the environment and agriculture.
Coated fertilizer belongs to inorganic coated fertilizer. It is a kind of coated fertilizer that one or several other fertilizers are wrapped on the surface of one fertilizer. In the fertilizer production line, we can use the coating machine to pelletize the pelletizing machine into coated fertilizer. Like NPK fertilizer production line, after granulating in rotary drum granulator sx, we use conveyor to put granulator into coating machine for coating. Generally speaking, slow release of insoluble fertilizer can be realized by wrapping other products. Generally speaking, calcium magnesium phosphate can be used as coating fertilizer. This product has the advantages of small environmental pollution, uniform particles, uniform nutrient release and good slow-release effect.
Through the use of fertilizer machine and fertilizer manufacturing technology, more and more different types of fertilizers can be produced. In the process of different types of fertilizer manufacturing, different types of fertilizer machines are equipped in the production line to manufacture different types of fertilizer granulators. For example, in the process of organic fertilizer manufacturing, a new type of organic fertilizer granulator will be equipped. This series of fertilizer granulators are specially designed for the production of organic fertilizer Designed for pelletizer. In addition to the fertilizer granulator, a fertilizer mixer and fermentation compost will be provided, and the same equipment will be used in the production of slow release fertilizer.
A fertilizer mixer will be used to mix the raw materials, then a fertilizer crusher will be used to grind the raw materials, and then a fertilizer granulator will be used to make a granulator with a drum. Generally, a complete fertilizer production line includes these processes. Using this technology and semi-automatic fertilizer machine to produce different types of fertilizers not only improves the work efficiency, but also reduces the labor cost compared with the traditional method.
As a fertilizer machinery manufacturer, we not only design and produce fertilizer machinery and fertilizer production lines, so that fertilizer granulator can use fertilizer manufacturing technology to produce, but also design fertilizer production lines for different types of fertilizer production. Requirements and raw materials used in the production process of fertilizer granulator.
In this article, we share what kind of fertilizer machine is needed in the powder fertilizer production line. Organic fertilizer or NPK compound fertilizer is powdery, and the process is simple and efficient.
In the process of fertilizer manufacturing, the main fertilizer machines for powder fertilizer production lines are fertilizer mixer, fermentation composter, automatic packaging machine, etc. The main fertilizer machine is fertilizer crusher. We have designed a new type of vertical semi wet material crusher. Vertical disc semi wet material crusher is widely used in cement, bauxite, clinker, silicon carbide, glass raw materials and other high hard, super hard materials in the field of fine crushing. It is widely used in the mechanical crushing of construction sand and various metallurgical slag. Compared with other types of crushers, it has higher output and efficiency.
The working principle of the new vertical semi wet material crusher is as follows:
Material from the upper part of the machine falls vertically into the high-speed rotating impeller. Under the action of high-speed centrifugal force, they will have multiple collisions and friction between impeller and shell, and then they can be directly discharged from the lower part, forming a closed loop and multiple cycles. The ring is controlled by powder fertilizer screening equipment to achieve the required particle size of the final product.
Roller screen for powdered organic fertilizer:
Powdery organic fertilizer drum screening machine is a new type of screening equipment. Drum screening is mainly composed of motor, reducer, drum device, frame, sealing cover and material inlet and outlet. The screen drum rotates at a certain speed through the variable speed threshing system, the materials are separated from top to bottom through the screen drum, and the fine materials are discharged from the screen. At the lower part of the front end of the screen cylinder, coarse materials are discharged from the lower part of the screen cylinder.
Organic fertilizer powder packaging machine:
Organic fertilizer powder packaging machine: with its “fast, accurate, stable” become the choice of packaging industry. Organic fertilizer powder packaging machine is suitable for packaging materials: woven bags, cloth bags and plastic bags. Packaging machinery materials: 304 stainless steel is used in contact with materials, which has high anti-corrosion ability. It is widely used in feed, compound fertilizer, BB fertilizer, grain, filling, chemical industry and other industries. : granular, powdery, mixed
Powdery organic fertilizer production line is not as complex as NPK fertilizer production line or bio organic fertilizer production line, and each machine in the production line is easy to operate.
In the process of organic fertilizer manufacturing, more fertilizer machines are needed, which are designed by fertilizer machine engineers. As a professional fertilizer machine manufacturer sx, we have produced fertilizer machine and designed fertilizer production line. Over the years, our products have been exported to many countries. We can also provide customer service for fertilizer production line. If you are interested in fertilizer machine or fertilizer production line, you can leave us a message and we will apply to you as soon as possible.
1. Without adding any wetting agent, the material is compressed by the pressure of roller granulator to ensure the purity of raw material.
2. The compound fertilizer production line for npk granulation has the advantages of short process, low energy consumption and high yield.
3. The dry powder is granulated directly without subsequent drying process, which is more conducive to the connection and transformation of the existing production process.
4. The increase of bulk density is more significant than other granulation methods. It is especially suitable for increasing the proportion of products.
5. Flexible operation, suitable for a variety of raw materials, high output, low energy consumption, and can adjust the size of extrusion pressure by adjusting the hydraulic pressure.
The compound fertilizer production line is equipped with double roll granulator, which has the advantages of short process flow, low energy consumption and large output. The dry powder is granulated directly without subsequent drying process, which is more conducive to the connection and transformation of the existing production process.
The increase of bulk density is more significant than other granulation methods. It is especially suitable for increasing the bulk density of products. It is flexible in operation and can be used in a wide range. The extrusion force can be adjusted by hydraulic pressure.
Organic fertilizer equipment occupies a certain position in agricultural production, and the production process of organic fertilizer really completes the agricultural cycle. Through the bio organic fertilizer equipment for harmless treatment of agricultural organic waste, the new organic fertilizer production line technology is more conducive to the recycling of waste.
The organic fertilizer equipment not only realizes the sustainable development, but also achieves the purpose of treating livestock manure and protecting the environment.
Steps to make organic fertilizer
1. Determine the output of organic fertilizer equipment: for example, how many tons per year or how many tons per hour, how many granular fertilizers per hour are processed by fertilizer granulator. Only when we know the output of the organic fertilizer production line can we determine the price of the equipment.
2. Determine the allocation level of organic fertilizer equipment: different allocation level, different price of organic fertilizer equipment, different amount of labor, different stability and high yield of organic fertilizer equipment.
How to make organic fertilizer granules?
3. Determine the shape of fertilizer particles, that is, which kind of organic fertilizer equipment to choose. Commonly used granulation equipment are: disc granulator, drum granulator, double roll granulator, flat mold granulator, new organic fertilizer granulator, etc. In granulators selection go to https://fertilizergranulatorfactory.com/
Bio fertilizer production
4. Determine the type of fertilizer produced. The plant produces and processes fertilizers and plans to use compound or organic fertilizer equipment. Bio organic fertilizer equipment usually needs to consider the moisture content and whether the bacteria can withstand high temperature.
By using organic fertilizer manufacturing process and adding microbial organic fertilizer opener, it is a good way to deal with agricultural waste innocuously. Organic fertilizer production equipment has truly realized circular agriculture, green agriculture and sustainable agriculture. More details go to https://organicfertilizerproductionline.com/
Different fertilizer manufacturing processes can be used to produce different types of fertilizer granulators. For example, an organic fertilizer manufacturing process designed to produce an organic fertilizer granulator. However, which fertilizer machines are included in the series?
In the manufacturing process of organic fertilizer, it mainly includes fertilizer mixer, fertilizer crusher and fertilizer granulator. The fertilizer production of organic fertilizer can be divided into fermentation, mixing and granulation. Parts use different fertilizer machine types.
In the production of organic fertilizer granulator, the first thing is to use the fermentation composter to ferment the raw materials, and then use the horizontal mixer to mix the raw materials. To mix the raw materials, the raw materials need to be crushed first. The utility model uses a new type of organic fertilizer granulator, which is a fertilizer granulator used for producing organic fertilizer granulator and is made into an organic fertilizer granulator.
In the production of organic fertilizer granulator, attention should be paid to the use of raw materials. Due to the requirement of moisture and temperature for organic fertilizer granulator, we need to use drum dryer and cooler to dry the water of fertilizer granulator after granulation.
The formula of organic-inorganic compound fertilizer refers to the content ratio of organic matter nitrogen, phosphorus and potassium and the addition amount of other elements in organic compound fertilizer. Because organic-inorganic compound fertilizer is often used as basic fertilizer, it actually refers to the ratio of organic matter to nitrogen, phosphorus and potassium in basic fertilizer.
Therefore, two parts should be paid attention to when determining the formula of compound fertilizer in the process of organic fertilizer manufacturing. The first step is the ratio of organic matter to inorganic fertilizer, and the second step is to determine the proportion of various fertilizers in inorganic fertilizer. Detailed info intro, go to https://compostturnermachine.com/compost-line/
How to select raw matewrials
Organic inorganic compound fertilizer is a compound fertilizer formed by adding inorganic fertilizer on the basis of organic materials. Therefore, it is necessary to select the appropriate ratio of nitrogen, phosphorus and potassium to determine the formula of organic matter content of organic-inorganic compound fertilizer. In raw materials selection and disposal, welcome to https://compostturnermachine.com/compost-materials/
Raw materials proportions
Granulation equipment of organic and inorganic compound fertilizer
This machine is suitable for compound fertilizer plant. The machine has been used by many fertilizer manufacturers and the quality of the products has been guaranteed. It can press the powder material directly into the particles under normal humidity. It is suitable for single element fertilizer and multi-element compound fertilizer, such as ammonium bicarbonate, urea, ammonium chloride, ammonium phosphate, potassium chloride, etc. the particle strength is high, no drying equipment is needed, and the production cost is greatly reduced.
Jordan organic fertilizer production line is a chicken manure organic fertilizer production line. Chicken manure production line, also known as bio organic fertilizer production line, is a set of production equipment which takes fresh chicken manure as raw material and produces natural organic chicken manure fertilizer through a series of processing.
There are two steps in the processing of commercial organic fertilizer in chicken manure production line: early fermentation treatment part and deep processing granulation part. The equipment needed for biological fertilizer production includes composter, organic fertilizer granulator, fertilizer crusher and screen machine, horizontal mixer, disc granulator, rotary dryer, cooler, screening machine, coating machine, packaging machine, conveyor and other equipment.
More than 65% of the fermented rotten chicken manure is ground by the conveyor belt, and the raw material is crushed and mixed with the raw material mill through the electronic measurement (NPK). The good material is crushed by the belt conveyor and granulated by stirring drum. In the drum granulator, under the condition of water and steam, the raw material temperature rises and the viscous material is sticky Itself is triggered.
Under the continuous rolling of the roller granulator, the material gradually rolls into a ball, and at the end of the granulator, the material enters into the pelletizing plate through the belt conveyor. Within the range of the granulation plate, the particles are continuously high and high, and continuously roll and circulate under the gravity. The strength of the particles is further enhanced, and the appearance of the particles is more round. With the increase of the particles in the pelletizing plate, the particles are gradually increased. NPK fertilizer manufacturing process is very similar to Jordan’s organic fertilizer production line.w
Biological organic fertilizer rotary drum granulator can make organic fertilizer from rice straw, rice husk, manure and other wastes. It is an important granulation equipment for processing agricultural waste into organic fertilizer. Burning a large number of rice straw causes serious pollution to the environment and affects people’s health. In addition, the effect of straw burning on soil fertility was very low. Processing straw into organic fertilizer with high nutrient content not only avoids environmental pollution, but also has high return, high product quality and low production cost. It is of great theoretical and practical significance to develop biomass fuel and reduce environmental pollution.
Working principle of rotary drum granulator for bio organic fertilizer
Under certain pressure and temperature, the bio organic fertilizer powder is compressed into cylindrical fertilizer by rotary drum granulator. The granulator uses extrusion force and friction force to compact sawdust and straw under high pressure and high temperature in the process of roller and drum movement. The material enters between the drum and the roller. The rotary drum is driven by a motor through a current reducer to rotate and extrude the die hole, and finally form the granular material. The main parts of rotary drum granulator are granulation roller and rotary drum. There are two kinds of granulator in our factory: single mode and ring mould.
Characteristics of rotary drum granulator for bio organic fertilizer
Organic fertilizer granulator has the advantages of low consumption, simple structure and convenient operation.
The rotary granulator has many functions and can be used in one machine. It can not only produce organic fertilizer, but also can be used for pellet processing such as feed.
3 organic fertilizer rotary drum granulator has small volume, small power and large output. It can be customized according to the user’s output.
4 rotary drum organic fertilizer production line can save drying and cooling treatment and save cost.
Application range of rotary drum granulator
Rotary drum granulator can be used for organic fertilizer granulation, such as organic fertilizer sludge, straw, peat, etc.
Cake, vegetable cake, sesame cake and peanut cake were used as the main raw materials.
The rotary drum granulator can use corn, beans, rice straw, chicken manure as raw materials for feed and mixed feed. More info on the rotary drum granulator welcome to https://www.wastetofertilizer.com/rotary-drum-granulator/
Investment and construction of organic fertilizer production technology
The main raw materials of organic fertilizer production process are pig manure, cow manure, chicken manure, etc.; the ingredients include: rice straw, straw, charcoal, rice straw, rice husk, etc.
The production process of organic fertilizer mainly includes: inoculation and fermentation of organic materials (before fermentation), main fermentation, crushing, compounding and mixing, drying, granulation, cooling, screening, metering and packaging.
Before the organic fertilizer production process is put into operation, the scale and location of the project should be determined. Organic fertilizer production line can be planned according to different raw materials, storage capacity, available amount and market demand. The related technology is divided into organic fertilizer, powder fertilizer and granular fertilizer.
In a word, the equipment configuration of powdery organic fertilizer is simple and the investment cost is low. The complete set of equipment from raw material fermentation to finished product packaging and storage is about 20000 US dollars.
The higher the production capacity, the higher the investment of organic fertilizer production plant, the lower the production capacity and the smaller the investment. If conditions permit, we can directly produce high-efficiency organic-inorganic compound fertilizer on the basis of organic fertilizer. Market benefit is multiple of organic fertilizer.
Reducing and reusing is really possible with organic gardening. But organic fertilizer plays an important role. Because the fruits, vegetables and gardens are harvested from the soil. You need to maintain soil nutrients for your fruits and vegetables and crops.
Time to use organic fertilizer
Most garden soils contain the most basic necessities. But it may not be enough. More is needed to fully develop.
When nutrition is needed for crop growth
Brass, potatoes and some other plants are more demanding – compost or dry manure is essential – poultry manure particles and buttons continuous planting season
Organic fertilizers are very useful because supplements see particles of poultry manure again
Lawns, shrubs, hedges, trees… Garden compost and manure is still a great supplier – find more lawn and shrub fertilizer here.
When growing on thin fertile soil
Work in manure – continue to use organic fertilizer to make compost of better quality, and plant cloves and beans as green fertilizer digs. Check out the organic base fertilizer and decarbonized rock dust link here.
Some products cannot use organic fertilizer. You must consider the following:
Where does organic fertilizer come from? For example, are algae threatened by commercial development? Will mining calcified seaweed destroy marine life? Does your fish fat come from fish waste?
Do manufacturers use important resources or are they involved in pollution? For example, burning carbon from natural gas used to produce chemical nitrogen,
How can you do this? Transporting large amounts of fresh manure?
Is it excessive or wasteful? The use of urea has attracted many supporters, but they are all considered bad for organic gardening, are soil structural microorganisms destroyed?
Why people are keen on carbon based fertilizer production?
Organic carbon fertilizer based on high-quality lactic acid and semi acid can promote the formation of soil aggregate structure, reduce soil bulk density, increase exchange capacity, adjust soil pH value, and contribute to improving soil moisture, fertilizer, heat preservation and ventilation capacity. Carbon based fertilizer can fundamentally improve the problems of soil hardening and soil fertilizer reduction.
In addition, humic acid is a kind of high molecular compound with multi-functional groups, which can provide sufficient carbon source and energy for soil microorganisms, promote the metabolism and reproduction of microorganisms, increase the retention of soil microorganisms, enhance the activity of soil microorganisms, and improve the soil environment.
Whether it is bamboo biochar, straw charcoal, or tobacco stem charcoal, the premise must be biomass charcoal. Fertilizers that are not in harmony with biomass charcoal can not be called true carbon based fertilizers. Carbon based fertilizer produced by sx organic fertilizer manufacturing technology is a kind of high quality fertilizer.
The emphasis of carbon based fertilizer is biochar, so the main function must be attributed to biochar. According to the porosity and strong adsorption capacity of biochar, the following points can be summarized:
1. Maintain soil moisture;
2. Increase microbial activity;
3. Lock nutrients in the soil;
4. Promote plant growth;
5. Establish lasting fertilizer efficiency.
Manufacturing technology of carbon based fertilizer
At present, carbon based fertilizer is also slowly circulating in the market, and its effect has been verified by many agricultural producers. The effect of carbon based fertilizer on improving soil and crop quality is significant. Carbon based fertilizer products also began to diversify gradually. Biochar can be processed into different types of carbon based fertilizer granules through the granulation process of disc granulator, flat mold granulator and roller granulator.
However, no matter what type of carbon based fertilizer, the ultimate goal is the same. Because of its porous characteristics and strong adsorption capacity, biochar is skillfully combined with various organic matter nutrients, inorganic nutrients and beneficial microorganisms to improve soil aggregate structure, enhance soil moisture and fertilizer retention capacity, enhance microbial activity and improve fertilizer utilization rate.
Roller granulator is a new dry granulation process for compound fertilizer production. Drying and normal temperature process are not used in production. After molding, the powder material with water content less than 15% is compressed into pieces. After comminution, granulation and screening, the flake material becomes the granular material meeting the requirements of use.
The roller granulator is produced by a process without drying and normal temperature, forming a primary. The equipment has the advantages of less investment, quick effect and good economic benefit.
Production technology of compound fertilizer with roller granulator
1. The qualified raw materials are added into the mixer according to the proportion requirements and mixed evenly;
2. In the process of conveying, it is transported to the disc feeder to remove iron from the material;
3. The material in the disc feeder enters the fertilizer granulator evenly, and the material is forced to pass between the two pressure rollers and extrude into a thin plate. The thin plate is broken into pieces by the coarse crusher under the pressure roller, and the materials on the screen continue to be broken and screened;
4. The semi-finished products are transported to the finished product screening machine; after screening, the fine particles are directly returned to the disc feeder; the large particles are crushed by the pulverizer, and then returned to the disc feeder,
5. After screening, the qualified products are transported to the automatic packaging scale for weighing, packaging and storage
The shape and size of the ball on the drum skin can be selected in a wide range according to the needs of users. The spherical shape includes pillow shape, semicircular particle shape, rod shape, ball shape, walnut shape, flat spherical shape and square strip shape. At present, the shape of flat ball is adopted.
The organic fertilizer production line of flat mold granulator has the characteristics of simple process, low equipment price and low power consumption, which is easy to use and maintain. The granulator can be used for granulation of organic fertilizer, compound fertilizer, feed and other materials. It has a wide range of material adaptability and many functions.
Application method of extruding fertilizer granulator flat die granulator
1. Before use, check whether the parts of the flat die granulator are tightened, whether the rotating parts are flexible, whether there is lubricant in the bearing, and whether the fertilizer granulator should be placed on a stable and stable ground. To check the power and voltage, the switch must be in the on position.
2. Check whether the clearance between the roller and the plate of the flat die granulator is kept at about 0.50 mm to prevent direct contact and abnormal wear. Select good mold aperture: select small mold when pressing small organic fertilizer; select large mold when pressing large organic fertilizer. During the operation of the organic fertilizer production line, attention should be paid to the site cleaning, and metal mixing into the powder and machine is strictly prohibited.
3. Start the flat mold granulator, check the granulation condition, check whether the surface of fertilizer particles is smooth and whether the temperature rise of particles is normal. By adjusting the bolts at both ends of the roller, the machine discharges normally.
3% of the material contained in the mold to prevent the mold from being corroded after the next time the mold is filled with oil.
With the continuous development of science and technology, the demand for agricultural fertilizer is higher and higher. For different crops, different regions and soils, the demand for fertilizer is different. In order to meet the actual needs of crop growth, in NPK fertilizer production line, fertilizer production enterprises should try to plant soil, apply fertilizer, prepare special fertilizer, adopt professional NPK fertilizer production process to produce compound fertilizer with multiple nutrients.
Roller granulator is widely used in NPK fertilizer production line. This kind of fertilizer granulator plays an important role in the production of compound fertilizer. The roller press granulator uses physical extrusion to produce elliptical particles. The roller granulator has greatly promoted the development of extrusion granulation of compound fertilizer and the extrusion granulation process of NPK fertilizer production line.
Production of compound fertilizer granules by rolling granulator
The characteristics of raw materials have an important influence on the granulation effect of roller granulator. The roller granulator can be used for granulation production of ammonium carbide, ammonium chloride, ammonium sulfate, vegetables, ammonium nitrate, magnesium sulfate, magnesium silicate, zinc sulfate, etc., as well as the granulation of NK compound fertilizers such as organic fertilizer and biological fertilizer.
On the other hand, the temperature of raw materials has a great influence on extrusion. In the extrusion process, the friction between the particles will generate heat and increase the material temperature. Generally speaking, the increase of temperature is conducive to the smooth completion of the extrusion process and the strength of the plate. However, too high temperature will also bring adverse effects, especially in the processing of urea based fertilizer materials, too high temperature will make the material adhere to the coil.
The roller granulator designed by Zhengzhou SX fertilizer equipment manufacturer adopts normal temperature extrusion granulation process, which can better maintain the characteristics of raw materials without affecting fertilizer efficiency. In order to avoid fertilizer bonding roller, the roll body of roller granulator was refined with a kind of anti-corrosion, wear-resistant, impact resistant and durable metal. More details in npk granules producion, go to https://www.fertilizermachinesale.com/npk-compound-fertilizer-granulation-equipment/
Organic fertilizer equipment is a popular mechanical equipment in chemical fertilizer processing market. With the rapid development of science and technology, the transformation and renewal of organic fertilizer production equipment is also very rapid.
What kind of organic fertilizer pelletizer is suitable for? Bio organic fertilizer spherical granulator is a new generation granulation equipment designed on the basis of absorbing, digesting and utilizing the advanced granulator principle at home and abroad. Through repeated experiments and development, the problems of high temperature sterilization and drying of chemical fertilizer have been overcome.
The new type of organic fertilizer granulator has the characteristics of reasonable design, simple structure, high temperature resistance, bacteria resistance, smooth particles and so on. Because the organic fertilizer particles are easy to loose and not easy to form balls, the moisture content of the particles is low and dry.
Organic fertilizer granulator is used to ferment various organic materials. In order to break the traditional granulation process of organic materials, the raw materials before granulation do not need to be dried and ground, and the treatment of spherical particles can save a lot of energy.
SX fertilizer equipment company specializes in the production of fertilizer granulator, new environmental protection and energy saving drum dryer, BB fertilizer equipment, double roller granulator and mold, fertilizer granulation equipment, compound fertilizer equipment, NPK fertilizer production line, metering and packaging equipment, automatic granulation system, dry powder granulator, biological organic fertilizer equipment, organic compound fertilizer equipment, disc granulator, drum granulator, urea crusher Electronic belt, etc. It is suitable for NPK compound fertilizer, organic inorganic compound fertilizer, organic fertilizer and bio organic fertilizer.