Granulators used to convert organic fertilizer into thread and teeth can make various materials into specific shapes. This is a special molding equipment. The equipment uses the aerodynamic force formed by the internal high-speed rotating mixer to realize the mixing, spheroidizing and densification process of fine powder in the machine.
Conversion granulation is the wet granulation of agglomerates by a certain amount of water or steam, so after adjusting the humidity, the basic fertilizer will have a complete chemical reaction in the barrel. Under certain liquid conditions, the rotation of the barrel will squeeze the material particles. The pressure condenses back into a ball.
The combination of the two granulation methods makes the prepared particles have higher sphericity and more beautiful appearance. At the same time, it saves energy and has high energy efficiency.
Main features of drum granulator:
1) Low investment, good economic benefit and reliable performance;
2) Low energy consumption, no three wastes emission, stable operation, convenient maintenance, reasonable process layout, advanced process and low production cost;
3) The ball has high strength, good appearance quality, corrosion resistance, wear resistance and low energy consumption;
The working principle of the drum granulator is that the belt and pulley are driven by the main motor and transmitted to the drive shaft through the reducer. The driving gear meshed with the big gear ring is fixed on the vehicle body. Work with each other.
Material is added from the feed end through the cylinder. Through the function of the special structure inside the cylinder, it is made into particles, and then flows out through the outlet. Due to the continuous entry of materials and continuous rotation of granulator, mass production can be realized.
The whole fertilizer granulator can be divided into five parts
1) Support: the whole rotating part of the organic fertilizer drum granulator is supported by the support, which bears greater force. Therefore, the supporting wheel frame of the machine is welded with medium carbon steel plate and channel steel, which has passed the strict quality control and special process requirements and achieved the purpose of the machine.
In addition to fixing the bracket on the shelf, considering that it will cause greater friction with the rolling belt of the car body, our factory specially selects anti-corrosion and wear-resistant materials to greatly extend the service life of the machine. Casting integration technology is also used. In addition, there are hooks on the four corners of the roller carrier, which is convenient for loading and unloading.
2) Transmission part: the transmission part of the whole granulator is very important to the whole body. The transmission frame is welded by channel steel and has passed the strict quality requirements. Installed on the gearbox, the main motor and reducer of our company use ISO products with reliable performance and reliable quality. The motor drives the pulley, V-belt and reducer to the spindle to make the body work. The transmission reducer is connected with the working parts of the main shaft through a nylon shaft pin connector.
3) Big gear: fixed on the body, with gear pinion, the opposite drive body work, using high-tech wear-resistant materials, so that the service life of the machine is longer.
4) Rolling belt: fixed on both sides of the fuselage, supporting the whole fuselage.
5) Body part: the body part of the whole granulator is particularly important. It uses high-quality medium carbon steel plate, built-in special rubber lining or acid resistant stainless steel lining for welding, in order to achieve automatic scar removal and tumor removal, eliminating the traditional scraper equipment, and through strict quality control and special process requirements, to achieve the purpose of this machine.