How to make fertilizer granules by extruding method?

Flat granulator is a kind of processing machinery in fertilizer plants. It is an extrusion fertilizer granulator, which is commonly used for fertilizer granulation.

The organic fertilizer production line of flat mold granulator has the characteristics of simple process, low equipment price and low power consumption, which is easy to use and maintain. The granulator can be used for granulation of organic fertilizer, compound fertilizer, feed and other materials. It has a wide range of material adaptability and many functions.

Application method of extruding fertilizer granulator flat die granulator

1. Before use, check whether the parts of the flat die granulator are tightened, whether the rotating parts are flexible, whether there is lubricant in the bearing, and whether the fertilizer granulator should be placed on a stable and stable ground. To check the power and voltage, the switch must be in the on position.

2. Check whether the clearance between the roller and the plate of the flat die granulator is kept at about 0.50 mm to prevent direct contact and abnormal wear. Select good mold aperture: select small mold when pressing small organic fertilizer; select large mold when pressing large organic fertilizer. During the operation of the organic fertilizer production line, attention should be paid to the site cleaning, and metal mixing into the powder and machine is strictly prohibited.

3. Start the flat mold granulator, check the granulation condition, check whether the surface of fertilizer particles is smooth and whether the temperature rise of particles is normal. By adjusting the bolts at both ends of the roller, the machine discharges normally.

3% of the material contained in the mold to prevent the mold from being corroded after the next time the mold is filled with oil.

Leave a Reply

Your email address will not be published. Required fields are marked *